Adding Filtration to Your Pond
Adding filtration to your pond is easy and helps contribute to a balanced pond environment. There are several options available, including in-pond and external filtration for small to large ponds.
CHOOSE THE APPROPRIATE FILTRATION FOR YOUR NEEDS
Choose the appropriate filter based on the intended placement and use (in-pond or external) and pond size and type. Refer to the packaging for specifics on pond volume and rate of flow. All pond filters available through The Home Depot include multi-stage mechanical and biological filtration.
CONNECT THE FILTER TO THE PUMP
Depending on the make and model of pump, most filtration systems are easily adapted for use with any pump and will, in most cases, include the necessary components for connection. Follow the included instructions for specifics relating to the filtration of your choosing and carefully connect your pump to the filter.
INITIATE WATER FLOW
Once properly installed, a pond filter will improve water quality, protect your pump from debris and contribute to the overall health of your pond. If a drop in performance is noted over time, you may need to disassemble the unit and rinse the parts with water to remove debris or build-up. The documentation included with these products will walk you through the specific steps.
Your quick rate has been submitted.
Please note it may take up to 8 hours for your quick rating to appear.
Sorry we are currently experiencing technical difficulties. Please try and resubmit your Quick Rating.
Skill Level: Beginner
Time: 1 hour
Due to differing conditions, tools, and individual skills, The Home Depot® assumes no responsibility for any damages, injuries suffered, or losses incurred as a result of attempting to replicate any of the home improvement ideas portrayed in this website Before beginning any home improvement project, review it thoroughly to ensure you or your contractor can finish the project and if any doubts or questions remain, consult local experts or authorities. Because codes and regulations vary greatly, you always should check with authorities to ensure that your project complies with all applicable local codes and regulations. Always read and observe all of the safety precautions provided by any tool or equipment manufacturer, and follow all accepted safety procedures.