English -1002 anonymous Create a Custom Picture Frame | Home Depot Canada
Home>Know-How Centre>Living & Bedroom>Create a Custom Picture Frame
Projects

Create a Custom Picture Frame

Project Overview

Create a Custom Picture Frame

Use frames as decorative accents for any room. Make frames for pictures, hallway mirrors, bathroom mirrors or corkboards. You are only limited by your imagination.

5 Steps

  1. Measure Moulding
  2. Cut Moulding
  3. Assemble
  4. Finish
  5. Tack in Artwork
Measure Moulding

Step 1

Measure Moulding

Measure the amount of moulding required to frame your artwork adding enough for a mitre on each end.

Cut Moulding

Step 2

Cut Moulding

Using a mitre saw or mitre box cut the moulding to the desired lengths.

Assemble
Assemble

Step 3

Assemble

Assemble the mouldings using wood glue and/or a staple gun.

Finish

Step 4

Finish

Stain or paint the frame and set aside to dry.

Tack in Artwork

Step 5

Tack in Artwork

Place artwork in frame and add staples to keep in place.

Write a Review
QUICK RATE:

You have rated

 out of 5 stars.

Do you want to submit this quick rating?

Yes No

Thank you!
Your quick rate has been submitted.

Please note it may take up to 8 hours for your quick rating to appear.

Sorry we are currently experiencing technical difficulties. Please try and resubmit your Quick Rating.

Thank you, you have already quick rated this product.  out of 5

Project Details

Skill Level: Beginner

Time: 2 hours

Before you start, read this »

Due to differing conditions, tools, and individual skills, The Home Depot® assumes no responsibility for any damages, injuries suffered, or losses incurred as a result of attempting to replicate any of the home improvement ideas portrayed in this website Before beginning any home improvement project, review it thoroughly to ensure you or your contractor can finish the project and if any doubts or questions remain, consult local experts or authorities. Because codes and regulations vary greatly, you always should check with authorities to ensure that your project complies with all applicable local codes and regulations. Always read and observe all of the safety precautions provided by any tool or equipment manufacturer, and follow all accepted safety procedures.

Related Resources

Projects

know how event34