Install a Bathroom Vanity
Often, all you need to do to update your bathroom is to install a new vanity. The choice in colour and style is wide you can go traditional or thoroughly modern. It's a good idea to look for something that is similar in size to your existing unit. With the addition of a matching sink and beautiful new faucet, your space will be transformed.
6 StepsShow all steps »
Carefully remove existing baseboard and set aside for reuse once vanity is in place.
Measure to determine where your vanity will be placed relative to the existing plumbing.
Install the vanity using screws through the cabinet into a wall stud. Then place the counter and sink.
Attach Braided Lines
Using an adjustable wrench, attach the braided lines on the tap leads under the sink. Then attach the opposite end of the braided lines onto the shut off valve coming from the wall. Gently tighten.
Install the P-Trap
Measure the distance to the wall from the centre of the tailpiece and cut the wall extension portion of the P-trap so that it fits into the PVC wall adaptor. Put the other end over the tailpiece at the bottom of the sink and adjust to ensure that everything is in line, then tighten both nuts.
Slowly turn the water back on with the taps open and check for leaks in the supply lines and P-trap. Re-tighten if necessary.
Your quick rate has been submitted.
Please note it may take up to 8 hours for your quick rating to appear.
Sorry we are currently experiencing technical difficulties. Please try and resubmit your Quick Rating.
Skill Level: Beginner
Time: 1 hour
Due to differing conditions, tools, and individual skills, The Home Depot® assumes no responsibility for any damages, injuries suffered, or losses incurred as a result of attempting to replicate any of the home improvement ideas portrayed in this website Before beginning any home improvement project, review it thoroughly to ensure you or your contractor can finish the project and if any doubts or questions remain, consult local experts or authorities. Because codes and regulations vary greatly, you always should check with authorities to ensure that your project complies with all applicable local codes and regulations. Always read and observe all of the safety precautions provided by any tool or equipment manufacturer, and follow all accepted safety procedures.
- Braided Lines
- Chrome P-trap
Calculators and Tools
Installing a New FaucetGet Started »