Projects

Testing a Light Socket

Project Overview

A light's out and you've already determined that a burned-out bulb isn't the culprit. (And, just to be thorough, you've also checked the main service panel for a tripped breaker or a blown fuse.) What do you do next? Well, first you need to find out if power is actually getting to the light socket. Assuming it is, your next step is to verify that the light socket itself is at fault. Here's how to do both.

Step 1

Remove Mounting Screws and Lower Socket

Remove the mounting screws, and carefully lower the socket. To test for current, touch one probe of the circuit tester to the screw terminal that's attached to a black wire. Touch the other probe to the ground screw, the bare copper wire, or the metal electrical box. Repeat this test with each of the other screw terminals. If the tester doesn't glow in any position, there's no power coming to the box.

Step 2

Remove and Test Socket

With the power off, remove the socket. To test the socket (shown cut away), attach the clip of a continuity tester to the hot screw terminal (or the black wire lead), and touch the probe to the metal tab in the bottom of the socket. The tester should glow; if it doesn't, the socket is faulty and will need to be replaced.

Step 3

Attach Continuity Tester

Next attach the clip of the continuity tester to the neutral metal screw terminal (or the white wire lead), and touch the probe to the threaded portion of the socket. Again, the tester should glow. If it doesn't, the socket is faulty and will need to be replaced.

Write a Review

QUICK RATE:

You have rated

out of 5 stars.

Do you want to submit this quick rating?

Yes No

Thank you!
Your quick rate has been submitted.

Please note it may take up to 8 hours for your quick rating to appear.

Sorry we are currently experiencing technical difficulties. Please try and resubmit your Quick Rating.

Thank you, you have already quick rated this product. out of 5

Project Details

Skill Level: Beginner

Time: 1 hour

Before you start, read this »

Due to differing conditions, tools, and individual skills, The Home Depot® assumes no responsibility for any damages, injuries suffered, or losses incurred as a result of attempting to replicate any of the home improvement ideas portrayed in this website Before beginning any home improvement project, review it thoroughly to ensure you or your contractor can finish the project and if any doubts or questions remain, consult local experts or authorities. Because codes and regulations vary greatly, you always should check with authorities to ensure that your project complies with all applicable local codes and regulations. Always read and observe all of the safety precautions provided by any tool or equipment manufacturer, and follow all accepted safety procedures.

Tools