Arrow Carport/Patio Cover Attached 10 x 10 ft. Eggshell
Model # PC1010|Store SKU # 1001148866
- Model # PC1010
- Store SKU # 1001148866
Made with strong vinyl-coated electro-galvanized steel, our patio cover/carport is perfect as an awning at the from or back of your house or trailer home. Protect your entrance, patio area, or vehicle from inclement weather and the baking sun. Our patio cover/carport is designed to attach to your home and can be assembled as a large DIY project, since all parts are pre-cut, pre-drilled, and clearly marked. With our premium 15 year warranty, this structure will withstand the test of time.
- Vinyl coated HDG STEEL for exceptional corrosion resistance
- Long-lasting vinyl-coating over galvanized steel has 5 times coating thickness than standard steel buildings
- Attaches to house or trailer home for additional storage of vehicles and lawn equipment or use as patio cover for shelter from the elements
- 1692 cubic feet capacity with substantial footprint sizes of 10 ft x 20 ft
- Appealing single-tone aesthetics in Eggshell to complement building exteriors. DIY assembly with pre-cut and pre-drilled parts
You will need Adobe Acrobat Reader to view PDF documents.
Customer ReviewsCarport/Patio Cover Attached 10 x 10 ft. Eggshell is rated out of 5 by 7.Rated 5 out of 5 by Lencho from Excellently... ExcellentlyDate published: 2019-01-22Rated 3 out of 5 by HomeDepotCustomer from The wind blew it off... The wind blew it offDate published: 2018-03-06Rated 1 out of 5 by Dewey from I can not review this product right now. It is still on the pallet waiting for my Pro Referral to... I can not review this product right now. It is still on the pallet waiting for my Pro Referral to install it, so I have not even seen what is inside the 2 boxes. The weather here in Fairfield CA. has been rain after rain so my chosen installer has changed my install date 3 times now. When it get it up I will update this review.Date published: 2017-02-07Rated 4 out of 5 by HomeDepotCustomer from Good Product... Nice product .. installation was not as hard as I thought it would be...Only negative for me is that my deck is 10x20 and rain comes in from front and side.. not a fault of the product, a size issue,,Date published: 2016-06-08Rated 2 out of 5 by SHOTT from Robert Hendershott Two of the roofs slats are not always rounded like the other three. They keep bending under the weight of rain or snow. In the spring I will need to figure a way to eliminate this problem so the roof does not fall in. Rather disappointed in the product but can't return it as it was a process to put together. Thanks for asking for my feedback.Date published: 2016-02-10Rated 1 out of 5 by HRC from A nightmare to put together "'""easy assembly""""" is what this description says. There is absolutely NOTHING easy about this assembly. You need to build wood frames to hold this thing up while you attempt to screw the tiniest little nuts and bolts in holes that in order to line up you need all assortment of fancy gripping clamps. I have spent weeks putting this thing together and from the picture i thought it would be silver steel colored, it's a hideous white color. In the description now that I looked at it it says beige/cream. Even that would be better than stark white. It made you bow the roof panels, but I can't get them to stay that way, so water is pooling is parts where the roof droops. It doesn't make ANY SENSE. I don't understand why it would go together that way, why it wouldn't stay that way. Worst DIY project I have ever taken on. I'm going to have to put 2 by 3's under the roof to get it to stay bowed. And then I think I'll weld everything together, just to make sure it doesn't fall apart. It's been an absolute nightmare, do not buy this unless you are paying someone else to put it together and that person has a lot of tools and spare wood and patience.Date published: 2016-01-25Rated 5 out of 5 by Fmplt from This product was good for the price This was an excellent product for the price and will last many years with moderate maintenance. My situation was to install this product one foot under a two foot soffit. This made locking the panels in individually impossible. I had to make a support to assemble the cover three foot out. I then had to slide the unit as one to the wall which made anchoring very difficult. I had to make some complicated modifications to anchor it to the wall. The end result was good.Date published: 2013-03-10