Illume 2.75-inch White Plastic LED Puck Kit (5-Pack)
Model # I-K5SRPLWH|Store SKU # 1000826715
- Model # I-K5SRPLWH
- Store SKU # 1000826715
The illume LED plastic pucks can be recessed or surface mounted in any direction. These pucks features a frosted lens and deliver highly efficient punches of white light for many applications and particularly kitchens. Ideal for inside accent lighting, you'll find many uses for them, under or over any cabinet, counter, shelf or display. Its very low profile makes it very easy to hide even in shallow structures. Up to 8 pucks on can be installed on this driver.
- Over 50,000 hours of service life
- Can be recessed or surface mounted in any direction
- Heat sink and thermal protection, plastic construction
- 12W LED driver included
- High-low On/Off switch included
- Warm white light (3000K), frosted lens
You will need Adobe Acrobat Reader to view PDF documents.
Customer Reviews2.75-inch White Plastic LED Puck Kit (5-Pack) is rated out of 5 by 1.Rated 3 out of 5 by Pault from Great solution for limited headroom. Bought and installed this item into a bathroom. Overall I am pleased with them but I marked them down for a couple of reasons. The instructions clearly state to remove the lights from the holders if flush mounting them. It just misses that this is done by twisting them apart, rather than squeezing the tabs together, which is what it looks like you need to do. I set up the lights in the places I was planning on installing them, using some painters tape. This helped making sure that I could connect them together as I had limited access above the ceiling. I plugged the unit in to see how it would look and only 2 came on! I played with some of the connectors and the remaining lights sprung into life. With this in mind I supported the connections with a little electrical tape to make sure they stayed together and working. My biggest comment is the fact that you need a 2 & 3/8" hole saw. There is not much room for error when the holes and made as the pucks will fall if to big or not go in if to small. The instructions give a 1mm tolerance either way. I ended up buying the hole saw at just over $30. With it, the lights were a breeze to install and they look awesome. I could see these being a very good solution for under cabinet lighting as they will easily mount to the bottom of a cabinet with the included brackets. The colour of the white lights is perfect for the application I am using it for in the bathroom. It gives a warm feel to the 36 sqft bathroom.Date published: 2016-06-03
I purchase these about 6 months ago for a rental unit in my basement and they have randomly started flickering. They will flicker for 5 minutes or so then just completely go out. Is this a common problem you have seen?Thank you for choosing illume® This is very unusual for the lights to start flickering as described. Please contact us.Date published: 2018-12-23
Are these LED pucks dimmable? If so, what dimmer do you recommend ?Thank you for choosing illume. This set of pucks can be dimmed. If using the provided power supply from the Kit, the dimmer needed is the I-DIMBOX which will connect between the plug-in driver and the first puck. If the pucks are installed using a hard wire driver,you can use one of the following Lutron dimmers available at your local Home Depot. CTCL-153P DVELV-300P SELV-300P DVLV-103P SLV-600PDate published: 2019-02-19
What would be the wattage equivalence for each puck? Also how tall are the pucks, if surface mounted, and can you surface mount with mounting tape? Are they hard wired in, or come with a plug and switch?Thank you for choosing illume. Each puck is 1.4W with a thickness 0.625". The can be installed using a double-sided tape but we strongly suggest using the provided screws as the mounting tape may stop sticking to the surface of the puck and/or substrate . The kit as purchased through Home Depot comes with a plug-in driver but a hard-wire installation can also be done with a compatible driver (sold separately).Date published: 2018-12-23