RIDGID
RIDGID 12 In. Compound Mitre Saw with Adjustable Laser

Overview

RIDGID’s Exactline adjustable laser alignment system makes exact miter cutting easy, time after time, even after blade changes. The laser is mounted on the arbor and is user-adjustable making it easier than ever to align the laser line with the left edge of the blade to show precisely where the left edge of the blade will cut. This makes your job simple: measure with care, line up your cutline with Exactline – and enjoy the pride of perfect joints. Includes: R4120 Miter Saw, Exactline™ adjustable laser guide, table extension, carbide-tipped blade, dust bag, dust guide, work clamp, blade wrench, hex key, operator’s manual. Motor: 120 V AC, 15 Amp No Load Speed: 4,000 r/min. (RPM) Blade Arbor: 1 in. Blade Diameter: 12 in. Cutting Capacities: Baseboard Against Fence: 6 in. Crown Molding Laying Flat: 6 in. Baseboard Laying Flat: 7-7/8 in. 90° Cross Cut (nominal): 2 in. x 8 in. or 4 in. x 4 in. 45° Miter Cut (nominal): 2 in. x 6 in. 45° Bevel Cut (nominal): 2 in. x 8 in. Weight: 46 lbs.

• 15 Amp heavy duty motor powers through the most difficult cuts
• Exactline Adjustable Laser Alignment System – assists operator to accurately align blade with the cut line
• Extended Bevel and Mitre Ranges – -3 to 48 degrees bevel and 0 to 50 degrees mitre capacities with crown moulding stops to accommodate a wide variety of cuts
• Zero Clearance Throat Plate – gives material maximum cut-through support
• 2 1⁄2 in. Dust Port – provides connection to standard dust collection systems to help keep work area clean
• Left Side Table Extension – for increased material support

Our Buying Guides are Here to Help

Mitre Saws

The mitre saw's versatility makes it an indispensable addition to any workshop. Depending on the type of mitre saw you purchase, you may be able to make up to four different kinds of cuts: mitre cuts, crosscuts, bevel cuts and compound cuts. Often used for structural framing,... Read more