• Cart
  • MAY LONG WEEKEND EVENT ON NOW!Shop All

    SharkBite 3/4x3/4x1/2 PLS REDUCTION TEE(5PK)

    Model # UP412CA5|Store SKU # 1001013519

    Overview
    Specifications
    Reviews

    Overview

    Model # UP412CA5 Store SKU # 1001013519

    The SharkBite PEX Plastic Barb Tee (5-Pack) is an easy to install, low cost solution to connect PEX pipe. Advanced Polymer Plastic fittings are a perfect solution for areas where corrosion may affect DZR Brass Fittings. SharkBite PEX Plastic Barb fittings are suited for potable water distribution and hydronic heating applications. These PEX fittings may be used with the stainless steel clamp system or the copper crimp ring system (both sold separately). The SharkBite PEX Barb fitting range offers a wide variety of Fittings, Manifolds, Valves, clamp rings, crimp rings and tools in various sizes to help complete your next plumbing project.

    1. Plastic polysulfone construction
    1. Lead free compliant and corrosion proof
    1. Meets UPC, IPC, and cUPC requirements
    1. Compatible with PEX pipe
    1. Meets NSF 61, ASTM F 877 and CSA 137.5
    1. Rated to 200°F and 200 psi

    Specifications

    Dimensions

    Assembled Depth (in inches)
    10.75
    Assembled Height (in inches)
    6.50
    Assembled Weight (in lbs)
    1.17
    Assembled Width (in inches)
    4.50
    Item Depth
    8
    Item Height
    0.76
    Item Weight
    0.13
    Item Width
    4.38

    Details

    Country of Origin
    AU-Australia

    Warranty / Certifications

    For warranty information on this product, please call our Internet Customer Service Center at 1-888-820-0120.
    3/4x3/4x1/2 PLS REDUCTION TEE(5PK)Photo of productThe SharkBite PEX Plastic Barb Tee (5-Pack) is an easy to install, low cost solution to connect PEX pipe. Advanced Polymer Plastic fittings are a perfect solution for areas where corrosion may affect DZR Brass Fittings. SharkBite PEX Plastic Barb fittings are suited for potable water distribution and hydronic heating applications. These PEX fittings may be used with the stainless steel clamp system or the copper crimp ring system (both sold separately). The SharkBite PEX Barb fitting range offers a wide variety of Fittings, Manifolds, Valves, clamp rings, crimp rings and tools in various sizes to help complete your next plumbing project.
    SharkBite
    1001013519
    CAD10.5
    The Home Depot Canada
    3/4x3/4x1/2 PLS REDUCTION TEE(5PK) is rated 4.9 out of 5 by 12.
    • y_2019, m_5, d_22, h_21
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_12
    • loc_en_CA, sid_1001013519, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getAggregateRating, 84ms
    • REVIEWS, PRODUCT
    Rated 5 out of 5 by from I am a fan of these PEX SharkBite fittings. They are well made, strong and less expensive than c... I am a fan of these PEX SharkBite fittings. They are well made, strong and less expensive than copper or bronze fittings. I have acidic well water that corrodes copper piping. The PEX and these reducer tees are not damaged by the acidic water. Unlike some fittings you can clearly see that you have the fitting properly inserted into the piping. I like to use the brass crimping rings to complete the connection. A leak proof fitting without the hassle of dealing with a torch and solder like with copping piping. I use these reducing tees to run my branch lines off the main supply line. [This review was collected as part of a promotion.]
    Date published: 2019-01-30
    Rated 5 out of 5 by from I decided to try these and I have no issues with them. Good quality and price. very easy to use a... I decided to try these and I have no issues with them. Good quality and price. very easy to use and install. I am trying to switch over to pex every time a repair is needed. These are light weight and very durable. For the price its the way to go in my opinion. All products from this company have been great. Its too soon to tell how these will hold up, what i can tell is that right now they are working perfectly fine. [This review was collected as part of a promotion.]
    Date published: 2019-01-16
    Rated 5 out of 5 by from Bought these for the new drip irrigation i was working on around the vegetable and fruit garden b... Bought these for the new drip irrigation i was working on around the vegetable and fruit garden before the summer. They fit well as described. Make sure the sizes meet the requirements else you would end up wasting them. It fits well for me but not for my neighbor. Did not experience any leaks, but didn't go all the way to 110psi, would have to try that sometime. [This review was collected as part of a promotion.]
    Date published: 2019-01-10
    Rated 5 out of 5 by from PEX is soooo easy. You can eliminate the unyielding copper pipe, the torch, solder, flux, sandpap... PEX is soooo easy. You can eliminate the unyielding copper pipe, the torch, solder, flux, sandpaper, wire brush, tubing cutter, files, reamers, fire shields, heat sink putty, and burns on your fingers. And all of that costs a small fortune. PEX tubing is flexible enough that you can eliminate many fittings. It is quieter than copper or galvanized pipe and can withstand freezing better (not that I would recommend that). There is less heat loss through the pipe for hot water and no corrosion problems, and it is fast to install. Fittings like these made by SharkBite work exceptionally well with stainless steel clamp-type connectors, and you can usually tell immediately if you connected it properly. If you have concerns about concealed fittings, consider installing a “home run” system, which eliminates most of them as well as eliminating restrictions. The company has a good track record, and parts are now available for reasonable prices throughout the country. [This review was collected as part of a promotion.]
    Date published: 2019-01-10
    Rated 5 out of 5 by from The Shark Bite Plumbing Solutions 3/4 in. x 3/4 in. x 1/2 in. PEX fittings are made from high quality plastic polysulfone that is rated to 200°F and 200 psi. They are cast inside and out to high tolerance so you will have smooth running water and when installing them they will work every time. Apollo supplies many different stiles of fitting for all your fitting needs. I hope this helps with your decision. Good luck with all your projects. [This review was collected as part of a promotion.]
    Date published: 2019-01-09
    Rated 5 out of 5 by from First things first ... if you are not sure how to use these parts, call a licensed plumber now. W... First things first ... if you are not sure how to use these parts, call a licensed plumber now. While the Shark Bite system is a great step forward for DIY folks, it's also an opportunity to mess up in a big and wet way. Be sure you know what you are doing before you start. Next, these Tee's are only part of a bigger connection system. You need to have a few tools and clamping rings to make this work. Just snugging up pipe to these parts will not complete the job and you will have water everywhere once you turn on the pressure. So, now that you know, take a look at these pieces. They are made very well and very precisely. If you are doing a big or small plumbing job around the house, a package of these along with packages of other sizes and styles will make your job a million times easier. Follow the instructions and you will have code compliant, inspector ready plumbing lines that last a good long time. [This review was collected as part of a promotion.]
    Date published: 2019-01-08
    Rated 5 out of 5 by from I have built a crazy water system to keep water flowing to sanders and grinders. I'm tearing it a... I have built a crazy water system to keep water flowing to sanders and grinders. I'm tearing it all out and starting over. Many of the fittings are 20 years old. These new replacements are the right size to fit the hosing. I use 1/2 inch and 3/4 inch lines. The 3/4 to 1/2 in adapter fits couplings and fits the other 3/4 inch threaded male parts without leaking. The Tee for 1/2 inch tubing fits snugly and has a nice stop so you don't go to far. These help connect the line to the individual machines. These parts are making the job much easier. Included are instructions for higher pressure systems which you will want to get a crimp ring for over the hose (by the stepped side). My system is very low pressure and does not need the crimp ring. [This review was collected as part of a promotion.]
    Date published: 2019-01-04
    Rated 5 out of 5 by from These 3/4 x 3/4 inch x 1/2 inch plastic pex barb x barb x barb reducer tee (5 pack) will be used ... These 3/4 x 3/4 inch x 1/2 inch plastic pex barb x barb x barb reducer tee (5 pack) will be used on my project of drip irrigation system for my house landscaping. These reducer tees seem very durable and will withstand the elements and should last a long time.I recommend this product highly because it is easy to work with and would require less maintenance while lasting a long time. [This review was collected as part of a promotion.]
    Date published: 2018-12-14
    • y_2019, m_5, d_22, h_21
    • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_12
    • loc_en_CA, sid_1001013519, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_homedepot-canada
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getReviews, 32ms
    • REVIEWS, PRODUCT
    • bvseo_sdk, java_sdk, bvseo-4.0.0
    • CLOUD, getContent, 160ms
    • QUESTIONS, PRODUCT
    • bvseo-msg: The resource to the URL or file is currently unavailable.;