Showing 4 of 4 products
CGC and SYNKO premium setting type compounds are the professional's choice of compounds for interior gypsum panels and exterior gypsum ceiling boards. CGC's chemically setting compounds rapidly harden (approx. 90 minutes, 45 minutes, 20 minutes) and have low shrinkage allowing for same day joint finishing. These products feature exceptional bond strength (virtually unaffected by humidity) and are ideal for heavy fills (shrinkage crack resistance). In addition, CGC and SYNKO setting-type compounds can be used for filling voids in interior concrete ceilings and above-grade concrete surfaces. CGC and SYNKO premium setting type compounds should be your choice for a professional finish.
Durock Brand Cement Board with EdgeGuard(TM) offers enhanced, proprietary edge performance, preventing spinout and crumbling. This mold resistant tile backer makes it the perfect choice for tile and flooring in baths, kitchens and laundry rooms in new construction and remodelling.Board is readily applied over wood or steel framing spaced 16 in. on center with corrosion-resistant wood, steel screws or hot-dipped galvanized roofing nails. After joints are treated, wall or floor tile is applied using latex-fortified mortar or Type I organic adhesive.
CGC Durock Brand Cement Board Underlayment is an ideal substrate for floor and countertop ceramic tile installations. The 6.4 mm (1/4") thickness helps eliminate transition trim when abutting carpet or wood flooring and minimize level variations with other finish materials. It can be applied directly over old substrate on countertops to save time. It features formed smooth edges and square-cut ends.
Securock Brand UltraLight Glass-Mat Sheathing (Regular and Firecode X) are lightweight glass-mat sheathing panels with moisture and mould resistanceup to 15% lighter than other glass-mat sheathings.The panels feature a noncombustible, moisture-resistant gypsum core that is encased in a coated fiberglass facer mat to maximize coverage of air/water barrier systems. These sheathing panels are intended for use under exterior claddings where conventional gypsum sheathing products have traditionally been used, such as brick veneer, properly detailed Exterior Insulation Finish Systems (EIFS), clapboard siding, panel siding, shingle siding, shake siding and conventional siding.