Showing 3 of 3 products
SHEETROCK Fiberglass Tape is made with a unique cross-fibre construction to provide greater drywall joint strength than conventional fibreglass mesh tapes. This self-adhesive tape goes on quickly, eliminating the bedding coat. Smooth, finished joints are accomplished in two coats by using CGC SHEETROCK or DURABOND, or SYNKO Fast Set or Pro Set setting-type joint compound for at least the first application. A second application of either SHEETROCK or SYNKO Joint Compound can be either setting-type or drying-type (ready-mixed or powder) joint compound. SHEETROCK Fibreglass Tape also is idea for patching small holes and cracks.
CGC and SYNKO reinforcing tapes add strength and crack resistance for smooth concealment of flat joints and inside corners. A special high-strength fibre paper tape for use with CGC & SYNKO joint compounds in reinforcing joints and corners in gypsum drywall and veneer plaster finish interiors. Exceptional wet and dry strength; resists tearing under tools. The tape is lightly sanded for increased bond and lies flat for easy concealment, is positively center creased which simplifies application in corners.
CGC Durock Brand Cement Board Underlayment is an ideal substrate for floor and countertop ceramic tile installations. The 6.4 mm (1/4") thickness helps eliminate transition trim when abutting carpet or wood flooring and minimize level variations with other finish materials. It can be applied directly over old substrate on countertops to save time. It features formed smooth edges and square-cut ends.
Securock Brand UltraLight Glass-Mat Sheathing (Regular and Firecode X) are lightweight glass-mat sheathing panels with moisture and mould resistanceup to 15% lighter than other glass-mat sheathings.The panels feature a noncombustible, moisture-resistant gypsum core that is encased in a coated fiberglass facer mat to maximize coverage of air/water barrier systems. These sheathing panels are intended for use under exterior claddings where conventional gypsum sheathing products have traditionally been used, such as brick veneer, properly detailed Exterior Insulation Finish Systems (EIFS), clapboard siding, panel siding, shingle siding, shake siding and conventional siding.