Conduit Benders

Gardner Bender Heat Shrink Tubing, 3/32 Inch - 3/64 Inch, Black, 3 Inch, 8/Clam

Thin wall heat-shrink tubing is constructed from durable, flame-retardant black polyolefin which is resistant to both solvents and fluids making it ideal for cable insulation, repair, marking or bundling. Heat shrink not only provides superior mechanical, abrasion and moisture protection but also strengthens connections and provides a comfortable gripping surface. As a result, professional and DIY multi-purpose uses include repairing cords (ranging from large appliance cords to small electronic cables that show wear at pull-out), covering tool and sporting equipment handles, and sealing rope for neat, unravel resistant ends. Finally, tubing capably resists common fluids and solvents. Upon heating to 120 C (250 F) the tubing begins to shrink but will not drip, crack or flow and is self-extinguishing within 30 seconds. Meets UL 224, 125 C: CSA C22.2 No3 198.1, 125 C; MIL-DTL-23053/5, Class 1 and 2, AMS 3636 and 3637;

Gardner Bender Ox-Gard Anti-oxidant Compound 1 oz; 1/Cd

Ox-Gard Anti-Oxidant Compound is the perfect safeguard for aluminum-to-aluminum, aluminum-to-copper wire connections and aluminum conduit joints. Instructions: Apply Ox-Gard to wires and work in with wire brush or emery cloth, apply liberally to both connector and conductor, assemble joint following connector manufacturer's instructions.

Gardner Bender Liquid Electrical Tape, Waterproof Seal, All Indoor/Outdoor Uses, Includes Brush, Black, 4oz, 1/Jar

This rubber based brush-on liquid tape forms a protective, waterproof, UV-resistant, dielectric seal around spliced electrical wire to protect against corrosion, shortages, electrical shock and vibration. The quick-drying fluid cures in 24 hours or less and will not deteriorate or unravel like traditional tape. Resistant to chemicals, solvents, saltwater and other common fluids, your connections will last for years to come. To apply, shake well then use brush built into the cap to liberally brush the liquid over the splice/connection. Allow to dry for 5 minutes and then re-apply if a thicker application is needed. 4 oz. bottle Temp range: -30 to 200 degrees F and -34 to 93 degrees C

Gardner Bender Dielectric Grease

GB's Dielectric Grease is specifically formulated to lengthen the life of connectors and improve their performance during unfavorable conditions such as rain, fog, salt spray and temperature extremes. Use dielectric grease whenever you need to insulate electrical connections and prevent water from accessing and corroding the connection. This silicone compound supports electrical performance by reducing line sag, arcing, voltage drops and problems caused by adverse weather conditions. Recommended for use wherever you have outdoor electrical connections including spark plugs, electrical panels, outdoor lighting, transformers, battery terminals, O-rings and rubber and plastic parts.