Showing 22 of 22 products
Doberman Security Alarm, the perfect safeguard to detect intruder break-ins via the window of your house, apartment, bathroom, store, office, or hotel room. It's simple installation. The package includes warning sticker.
The ET120 is it the perfect choice for HVAC professionals. It is an easy-to-use tester that provides audible and visual alarms in the presence of methane, propane and other combustible gases at concentrations as low as 50 ppm. It features two levels of sensitivity depending on users' needs: High (approximately 50 to 1000 ppm) and Low (approximately 1,000 to 10,000 ppm).
Leviton's IPS06 Occupancy Sensor combines state-of-the-art technology with new aesthetics to provide optimal management of lighting loads. These energy-saving sensors are engineered to control current LED and Incandescent/Halogen loads and ensure that lights will turn ON automatically and turn OFF automatically when motion is no longer detected within the covered range. Designed to fit in a standard wallbox, the device offers 180 Field of View and 900 sq. ft. of coverage. The IPS06 has screw terminals for easy installation and does not require a neutral wire for connection. The devices feature a time delay setting which allows users the option to delay the light load from switching off for 30 seconds, 5 minutes, 15 minutes or 30 minutes. For example, closet lighting would ideally be set to turn OFF 30 seconds after the space is vacated. The IPS06 is single pole or 3-way, and is compatible with screw-based LED, Incandescent and Halogen loads.
Leviton's IPV02/IPS02 Universal Vacancy and Occupancy Sensors combine state-of-the-art technology with new aesthetics to provide optimal management of lighting and motor loads and a choice of either Manual-ON (Vacancy Sensor) or Automatic-ON (Occupancy Sensor) switching. These energy-saving sensors are engineered to control current LED, CFL, Electronic and Magnetic Low Voltage and incandescent loads and ensure that lights/motors will turn ON manually (vacancy) or automatically (occupancy) and turn OFF automatically when motion is no longer detected within the covered range. All models have screw terminals for easy installation and do not require a neutral wire for connection. The devices feature a time delay setting which allows users the option to delay the lights/motor load from switching off for 30 seconds, 5 minutes, 15 minutes or 30 minutes.