Showing 2 of 2 products
Ideal Security's pneumatic door closer with torsion bar is designed for heavy, out-swinging aluminum, steel or wood storm doors over 1 1/2-inches thick. The tube is made from aluminum and has an air adjustment screw to control the door closing speed. The flat torsion bar on the closer flexes under pressure, providing extra closing force to aid in the latching of heavier doors. A speed release washer is included for easy closing when used to hold the door open: A simple push on the door will release the washer and allow the door to close. Easy to install, using the existing holes on your door. If this style of closer was not on your door, new holes may be required. This heavy-duty storm door closer can be installed at the top, middle or bottom of your door, depending on its construction. Brackets and screws for installation are included. The addition of the SK14 storm chain is recommended to protect your storm door and door closer from weather induced damage.
The Andersen 3000 Series 34 in. White Aluminum Full-View Storm Door with Brass Hardware helps keep out drafts with dual weather stripping and a double bottom door sweep. It comes with complementing brass hardware and a TruScene insect screen that's nearly invisible and offers clear views to the outside. It has tamper-resistant hinges for security and a convenient, hands-free bottom door closer.
The Ideal Security Heavy Door Closer is for out-swinging storm and screen doors that are 1 1/4-inches to 2-inches thick. Package includes the SK1730 pneumatic door closer for heavier storm and screen doors, the SK26 wide-base bracket for the door jamb allows new holes to be drilled if existing holes have been damaged or stripped; extra-long screws, and the SK14 wind chain, to protect the door, the glass and the door closer pump from damage if a strong wind catches the door. This heavy-duty storm door closer features winter and summer settings for when screens are used instead of glass and features an air by-pass for extra latching power. The closing speed is controlled by an adjustment screw at the end of the tube. Tightening the screw will slow the closing, loosening it will speed it up. All fasteners and brackets are included. This door closer is original equipment quality (OEM). If yours is a lighter-weight door, consider Ideal Security's SK9 Standard Door Closer.
This heavy duty pneumatic (air pressure) door closer from Ideal Security is appropriate for use on heavier aluminum, steel or wood storm and screen doors from 1 1/4-inch to 2-inches thick. the door closer's cylinder measures 1 1/2-inches in diameter and it has an overall length of 13-inches. This series is for out-swinging storm doors. The door closing speed is adjustable with the air adjustment screw at the end of the closer tube. The closer tube is made of aluminum which will not rust. The closer can be installed at the top, middle or bottom of your door, depending on the construction of your door. The Touch-N-Hold function allows you to keep the door open by pressing only a button, the mechanism disengages once the door is pushed.