Showing 1 of 1 products
For the heaviest doors, choose Ideal Security's pneumatic (air pressure) door closer with torsion bar. Designed for heavy, out-swinging aluminum, steel or wood storm doors over 1-1/2 inch thick. The flat torsion bar on the closer flexes under pressure, providing extra closing force and aiding in the latching of heavier doors. The door closing speed is adjustable with the air adjustment screw. The tube is aluminum, which will not rust.Quick-Hold Feature No more fumbling with stoppers to keep your storm door open. Simply push the door open slowly until you hear a click, and the door remains open at a 75 degree angle. To close the turn simply push the door further, then release.Installation Easy to install, using the existing holes on your door. If this style of closer was not on your door, new holes may be required. Please follow the instructions. The closer can be installed at the top, middle or bottom of your door, depending on its construction. Brackets and screws for installation are included.To protect your door and door closer from damage, we recommend adding a storm chain (SK14).Ideal Security supplies storm door hardware to quality door manufactures across North America.
Original heavy duty storm door closer with torsion bar painted silver For doors over 1-1/2" thick for superior closing power Adjustable closing power Complete with brackets and screws Cylinder diameter 1.5", tube length 10.5"
Make any door self-closing!By simply replacing the pin in your standard door hinges with this small device, you can add a spring-loaded closer to any interior door. Hinge pin door closers are great for keeping children out of dangerous areas, keeping office doors closed, preventing mischievous pets from getting into the garbage, or any other situation where you don't want to get forget to close the door.Unlike other door closers, the SK50 is small and unobtrusive. It's got a nice cylindrical cover which can be color-matched to your hinges and sits along the jamb behind the door so it's almost invisible.All you have to do is remove the pin from one of your door hinges and slide the SK50 into its place. You then set the closing tension using the included wrench, and test. If the door closes too hard or not enough, you can adjust the tension. Installation is quick and easy.
- Adjustable latching speed and closing speed- Compatible with left-hand and right-hand doors- Maximum 180° opening angle- Tri-pack for regular, parallel arm and top jamb installation- Precision cast aluminum alloy housing- Rack and pinion mechanism- Non-critical thermostatic valves- High quality non-gumming and non-freezing hydraulic fluid- cUL and UL listed- 5 year limited warranty on finishes