Showing 1 of 1 products
This is a mortise lock that is excellent for either wood or aluminum door application, with an integration of keeper and lock for positive anti-lift protection. The plated steel hook is mounted in an anti-friction pivot, and encased in aluminum housing. Typically this is used by Pennco and a variety of other door manufacturers. Mounting holes are 3-7/8 in. on center with an overall depth of 1-11/16 in.
This is a Trimline cam lock made of high pressure, corrosive resistant diecast zinc. It features a baked on white enamel finish. A concealed locking mechanism pulls rails together helping to reduce air infiltration. The alignment lugs prevent side shift of the sash, and the slim-line design for narrow rail application With a lower profile it allows maximum sash opening. Mounting holes are 2-1/16 in. on center, with an 11/16 in. hole backset.
This bright brass latch guard set is constructed of solid steel. Designed for use with inswing hinged entry door systems. Features a 2-piece shielding design that interlocks to help protect door from forced entry. The wider jamb bracket mounts to the door jamb with tamper-resistant one-way drive head screws, and the U-shaped bracket mounts onto the door with 4 flat head sheet metal screws.
This Door Strike Reinforcing Kit by Prime-Line Products is constructed of solid brass and comes in a beautiful, corrosion resistant, polished brass finish. This two-piece security strike kit allows for hole center flexibility in securing combination deadbolt and entry lock installation, as the two can be separate from one another as determined by existing door locking hardware. The deadbolt and entry lock strikes included in this kit replace most strikes and improves security with 3 in. long screws attached to wall stud.