Showing 7 of 7 products
This is a Trimline cam lock made of high pressure, corrosive resistant diecast zinc. It features a baked on white enamel finish. A concealed locking mechanism pulls rails together helping to reduce air infiltration. The alignment lugs prevent side shift of the sash, and the slim-line design for narrow rail application With a lower profile it allows maximum sash opening. Mounting holes are 2-1/16 in. on center, with an 11/16 in. hole backset.
This Door Strike Reinforcing Kit by Prime-Line Products is constructed of solid brass and comes in a beautiful, corrosion resistant, polished brass finish. This two-piece security strike kit allows for hole center flexibility in securing combination deadbolt and entry lock installation, as the two can be separate from one another as determined by existing door locking hardware. The deadbolt and entry lock strikes included in this kit replace most strikes and improves security with 3 in. long screws attached to wall stud.
Ideal Security's push paddle is an inside storm door latch that's compatible with push-button, pull, and lever style exterior storm door handles.Using the standard 1 3/4-inch screw hole spacing, this storm door latch can replace various styles of inside storm door handles, including ones that turn (rotate).The SK357 can accommodate various spindle styles: flat steel, round steel, square zinc & steel combos, but note that the maximum spindle width is 0.176-inches/4.47 mm. If yours is a square spindle that is the same size the whole way, it will not work with the SK357.Before purchasing, please verify that your existing spindle and hole spacings are compatible with the SK357 by measuring carefully and consulting the images for guidance. This interior storm door latch is compatible with Ideal Security's Classic, VP, GL, ML and DX series.
Discover this Polymer Gate Latch - 1 sided. It is rust resistant and designed for right-handed or left-handed applications. The closing mechanism is automatic.Dimensions: Handle with pin: 6.5 inch. length x 1.5 inch. width x 2.25 inch. depth Pin: 0.5 inch. diameter protrudes 2.5 inch. from handle Latch: 6-5/8 inch. length x 1.75 inch. width x 2-7/8 inch. projection