Showing 40 of 127 products
The Andersen 3000 Series 34 in. White Aluminum Full-View Storm Door with Nickel Hardware helps keep out drafts with dual weather stripping and a double bottom door sweep. It comes with complementing nickel hardware and a TruScene insect screen that's nearly invisible and offers clear views to the outside. It has tamper-resistant hinges for security and a convenient, hands-free bottom door closer.
Ideal Security's pneumatic door closer with torsion bar is designed for heavy out-swinging aluminum, steel or wood storm doors over 1 1/2-inches thick. The tube is made from aluminum and has an air adjustment screw to control the door closing speed. The flat torsion bar on the closer flexes under pressure, providing extra closing force to aid in the latching of heavy doors. The quick-hold feature replaces the traditional sliding washer, simply push door slowly until it clicks to keep open at a 75-degree angle, and push door further to close.Easy to install using the existing holes on your door. If this style of closer was not on your door, new holes may be required. This heavy-duty storm door closer can be installed at the top, middle or bottom of your door, depending on its construction. Brackets and screws for installation are included. The addition of the SK14 storm chain is recommended to protect your storm door and door closer from weather induced damage.
Classic push-button handle set from Ideal Security for all out swinging storm doors or screen doors 1-inch to 2-inches thick. Mounts 1 3/4-inches center to center. Inside latch and solid strike included. Converts to locking unit with Ideal Security's SK8.
This heavy duty pneumatic (air pressure) door closer from Ideal Security is appropriate for use on heavier aluminum, steel or wood storm and screen doors from 1 1/4-inch to 2-inches thick. the door closer's cylinder measures 1 1/2-inches in diameter and it has an overall length of 13-inches. This series is for out-swinging storm doors. The door closing speed is adjustable with the air adjustment screw at the end of the closer tube. The closer tube is made of aluminum which will not rust. The closer can be installed at the top, middle or bottom of your door, depending on the construction of your door. The Touch-N-Hold function allows you to keep the door open by pressing only a button, the mechanism disengages once the door is pushed.