Showing 5 of 5 products
This is a 3/4 in. tub and shower door nylon ball bearing roller with a flat edged wheel. It has a threaded hex head hub that uses an 8-32 x 3/8 in. long Philips binder head machine screw to fasten it to the door bracket. Used on a variety of different tub and shower top roller systems. If you require a larger roller use Prime-Line part M 6003 for 7/8 in. flat roller.
These bi-fold roller guides are constructed of steel, nylon and plastic components. They are commonly used with Kenna Frame bi-fold doors, but many other manufacturers also use this same size guide. These spring-loaded roller guides feature 7/8 in. outside diameter wheels that are 1//4 in. thick with a 3/8 in. outside diameter base. These guides mount on the top edges of bi-fold doors and require only a 3/8 in. diameter hole in which to insert. Use these top-mounted guides where rollers are missing, damaged or not working properly, to restore bi-fold doors to the ease of operation they were designed to have.
This is a three piece adjustable closet door floor guide. Made of tan nylon, the 1 in. tall guides at each end can be adjusted inward to accommodate doors 7/8 in. to 1-3/8 in. thick. Used by a variety of closet door manufacturers. For a taller guide use Prime-Line part N 6761.
Designed to be installed on most types of doors, this pocket door is a stylish way to add safety to your home. Available in a variety of finishes, it surely suits any design!Compatible with left-hand and right-hand doors. The dimensions of the cut out required in the door to accept the pocket door pull are 7/8 inch. high (73 mm) x 1-3/4 inch. wide (45mm). The pocket door pull itself is larger than the cut out needed so the cut out is not visible.