Stainless Steel Pins, Rings & Clips(2 products)

Paulin 5/16 x 1-inch Clevis Pins - 18.8 Stainless Steel

Clevis pins are used on the ends of a clevis and is inserted through pronged ends. The clevis is kept in place by a cotter pin that is inserted at the end of the pin. Connected parts can move freely around the pins axis. Use stainless steel where corrorsion is and rust is of concern or in exterior applications. Best for general hardware use or where high strength is not required.

Paulin 1/8 x 2-inch Cotter Pin - 18.8 Stainless Steel

Cotter pins commonly used to secure two items together through a drilled hole. To use, place the cotter pin in the pre-drilled and the bulbous head will stop the pin from moving all the way through. Then, bend the open tips in opposing directions to secure in place. Use stainless steel where corrorsion is and rust is of concern or in exterior applications. Best for general hardware use or where high strength is not required.

Ramset 2" Drive Pin (100-Pack)

Ramset pins for Powder Actuated Tools. Use In concrete and structural steel applications. ITW Ramset fasteners are specifically fabricated to meet the exacting requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel.

Ramset 1-7/8" Power Point Pin (100-Pack)

Ramset PowerPoint pins work well in advanced steel and concrete fastening applications. They provide easier penetration into hard steel and concrete, which means reduced pin failures and increased holding values to make your jobs more productive