Finishing Washers(3 products)

Paulin #8-inch Finishing Washer- 18.8 Stainless Steel

Finishing Washers are also called a trim or cup washers. They are used in all types of trim work with flat or oval head screws. The cupped design gives a clean finished appearance and dress up any project. Use stainless steel where corrorsion is and rust is of concern or in exterior applications. Best for general hardware use or where high strength is not required.

Paulin #8-inch Medium Lock Washers - 18.8 Stainless Steel

Lock Washers provide a locking spring action and prevent fasteners from loosening due to vibration. They are used with a bolt or screw to evenly spread the load over a wider area. Use stainless steel where corrorsion is and rust is of concern or in exterior applications. Best for general hardware use or where high strength is not required.

Paulin #6 Steel Countersunk Finishing Washers-Standard Type-Nickel Plated

Washers provide a greater bearing surface under the fastener. This helps prevent a nut, bolt or screw from pulling through the material. Application: Countersunk Finishing Washers are used in body trim work with countersunk head screws and bolts.

Paulin 1/2-inch Flat Washer - 18.8 Stainless Steel

Flat washers are great for adding resistance to your bolts and screws that will provide a greater bearing surface under the fastener to prevent them from boring into the surface and weakening it. Used behind a nut or screw head to distribute load and to prevent material from buckling or screw pull-through. Washer sizes are specified by the bolt or screw diameter and should be matched to ensure proper fit. Flat washers also prevent loosening due to vibration and can act as spacers. Flat Washers are free from burrs and have smooth, flat surfaces. Use stainless steel where corrorsion is and rust is of concern or in exterior applications. Best for general hardware use or where high strength is not required.