Zinc Coated Lock Washers(8 products)

Paulin #8 Steel-Regular Spring Lock Washers - Zinc Plated

Washers provide a greater bearing surface under the fastener. Lock washers place tension against a nut after tightening, to help prevent the nut from loosening.

Paulin 5/8-inch Steel-Regular Spring Lock Washers - Zinc Plated

Lock washers known as split lock washers place tension against a nut after tightening, to help prevent the nut from loosening. They provide a more uniform load distribution, and are great for any indoor/outdoor project. Ideal for situations where potential loosening from corrosion or vibration is a concern. Lock washers provide a locking spring action and are used to prevent nuts and bolts from coming loose from vibrations. They have split ends that help "lock" into the mating material, thus providing a locking feature when tightened beneath a nut. Steel is zinc plated for moderate protection against rust. Use hot dipped galvanized finish or stainless steel where corrorsion and rust is of concern or in exterior projects.

Paulin 1/4-inch Medium Lock Washers - 18.8 Stainless Steel

Lock Washers provide a locking spring action and prevent fasteners from loosening due to vibration. They are used with a bolt or screw to evenly spread the load over a wider area. Use stainless steel where corrorsion is and rust is of concern or in exterior applications. Best for general hardware use or where high strength is not required.

DECKMATE 1/2-inch 316 Stainless Steel Split Lock Washers-4pc

Split Lock Washers are great for any indoor/outdoor project. Ideal for situations where potential loosening from corrosion or vibration is a concern, split lock washers are used to prevent nuts and bolts from coming loose. Grade 316 Stainless Steel is recommended for coastal and high corrosion environments