Basement Watchdog Sump Pumps(3 products)

Everbilt 1/2 HP Shallow Well Jet Pump

The Everbilt 1/2 HP shallow-well jet pump has a pre-wired pressure switch 30/50 psi for automatic operation and self-primes after the housing is initially filled with water. The fiberglass-reinforced thermoplastic pump housing resists corrosion. This pump comes ready to install and is designed for wells with pumping levels of 25 ft. or less. This jet pump has a fan-cooled and dual voltage 115/230-Volt motor.

Everbilt 1/2 HP Shallow Well Jet Pump with 6 gal. Tank

The 1/2 HP Shallow-Well Jet Pump Combo features a 230/115-Volt motor for high output. The jet pump is manufactured with a heavy duty reinforced thermoplastic housing for durability. This jet pump self-primes after the housing is initially filled with water and has thermal overload protection to help prevent overheating. The maximum pressure for this pump is 65 psi, and it is designed for use in shallow wells with depths to water up to 25 ft. Supplied with 6 gallon pre-charged pressure tank ( 15 gallon standard tank equivalent).

Bur-Cam 1/3 HP Rugged Cast Iron Submersible Sump Pump with Automatic Start-Stop Cycle.

Built for residential automatic drainage of basement sump pits, this model replaces upright and submersible pumps and is designed for a permanent installation in a 14" basin and larger. Motor turns on when the water level lift the tethered float switch. Motor turns off when the float switch drops down. Recommended for a residential installation where the dynamic pumping head does not exceed 18'. Maximum flow of 3050 GPH (11525 LPH).

BURCAM 1 HP submersible effluent pump

The BURCAM 300523 submersible effluent pump is designed for use in residential applications either in a new installation or to replace an existing upright or submersible sump pump or effluent pump. The 1HP, 115V motor includes automatic thermal and overload protection. The vertical float switch ensures automatic operation of the pump and can be used in sump basins as small as 10-inch in diameter. The pump is equipped to handle 1/2 inch solids and includes a non-corrosive Noryl clog-free vortex impeller. The motor casing is made of stainless steel and the body is made of rugged cast iron. The maximum head is 25 feet and the capacity is up to 4400 US GPH.