Generac Utility Pumps(6 products)

Everbilt 1/3 HP Reinforced Thermoplastic Pedestal Pump

The 1/3HP pedestal sump pump manufactured of corrosive resistant thermoplastic materials will discharge up to 3,000 gallons per hour of water. It includes an adjustable vertical on/off switch. It is driven by an air cooled 115V motor.

BE Power Equipment 158 GPM Gas Engine Water Transfer Pump with 2in. Ports

BE Power Equipment, proudly Canadian owned and operated, brings you the water transfer pump, WP-2070S. Our reliable Powerease 225 engine drives the pump delivering the power you need for your outdoor projects. The pump body is made with aluminum to lower weight, and has a cast iron impeller for strength. It is designed to be used with clean water only. (Chemical mixes or water with debris is not recommended.) Capable of moving 158 Gallons of water per minute with a suction lift of 23 ft, and a discharge lift of 59 ft. Steel roll cage protects the machine and provides ergonomic hand holds to easily maneuver it. Built-in data plate includes all the key information the user would need to operate it.

BURCAM 1/6 HP automatic submersible utility pump

The BURCAM 300506S automatic submersible utility pump is ideal for general water transfer applications including draining basements, spas, pools, flat roofs, window wells and much more. This device monitors the water levels while pumping, so you can simultaneously do other things. Built of non-corrosive Noryl, the pump is lightweight and easy to carry. It has a water-cooled motor, garden hose discharge threads and comes with a barb adaptor for 3/4" flexible pipe. 9-ft grounded power cord. The electronic float starts the pump when the water level reaches 1.75 inches (+/- 0.5 inch). When the float reaches its shut off point, the motor continues to run for an additional 30 seconds to drain as much water as possible (down to 1/8 inch from the surface). With a capacity up to 740 US GPH and maximum head of 15 ft, the BURCAM 300506S is a must for every home.

Generac 5.7HP 2 in. Gas Powered Semi Trash Pump

Specifically engineered to handle muddy or sandy water, the ST20S is powered by a 169cc Subaru engine that pumps up to 158 gallons per minute. With features such as low-oil shut down, custom Easy Prime funnel design for quick and easy priming, and a large fuel tank with integrated fuel gauge, its both durable and easy to use.