Showing 1 of 1 products
The Advantage ADV135KH Mini Electric Tankless Water Heater provides a Point-of-Use hot water solution utilizing a patented heating technology that offers instant hot water on demand. Our Mini Electric Tankless units are ideal for Point-of-Use hand washing with applications such as sinks in bathrooms, offices, warehouses, cottages, trailers and restaurants. Instant Point-of-Use water heating means no pre-heating or stand-by heat loss, saves energy and reduces water-heating costs by up to 50%. Our Advantage ADV135KH is a 120V/3.5KW/60Hz Point-of-Use pre-wired water heater that is easy to install as it simply plugs into a 120V outlet (min required 30 Amp breaker) and uses National Pipe Thread NPT standard fittings. Our units are efficient and economical and offer multiple residential and commercial applications.
See More +The Eccotemp 45H Indoor Natural Gas Tankless Water Heater is one of the most advanced CSA approved indoor models of the Eccotemp tankless line. The included Eccotemp 4" category III, stainless steel, UL listed Horizontal Vent Kit makes installation a breeze. Additional venting may be required based on your installation. The Eccotemp 4" Horizontal Vent Kit Includes a termination hood with backflow preventer, 90-degree elbow, 12" straight pipe, wall thimble, and appliance adapter.Rated at an impressive 6.8 GPM with a temperature rise of 38 degrees and 140,000 BTU per hour, the Eccotemp 45Hi-NG can meet all your hot-water needs! Eccotemp's advanced 0.7 GPM low flow ignition technology allows users to enjoy endless hot water without experiencing cold spots.We recommend the Eccotemp 45Hi-NG for standard size single family homes, apartments, condos, cabins, as well as smaller commercial applications. Using 2-3 hot water applications simultaneously is a breeze with the Eccotemp 45Hi-NG. With our upgraded PCB (Product Control Board) performance and an all new gas modulating valve, consumers can experience best in class temperature performance with a price anyone can afford. The compact, wall mounted Eccotemp 45Hi-NG has a 110/120-volt UL listed power cord that powers the internal Exhaust Fan, Anti-Freeze Protection, Digital Display and PCB. With its fully automated control system, the Eccotemp 45Hi-NG only pulls about .67 amps during operation, making it an ideal for low energy consumption and efficiency. The Eccotemp 45Hi has been CSA tested and approved for US & Canadian use at elevations up to 2000 feet. Installation and use of the Eccotemp 45Hi above 2000 feet may affect overall product efficiency and performance. Installation and use of the Eccotemp 45Hi above 5000 feet is not recommended.IMPORTANT NOTE: Cannot be used for HYDRONIC SYSTEMS, RECIRCULATING, or FLOOR HEATING.
See More +The Eccotemp EL22 Indoor Natural Gas Tankless Water Heater is one of the most advanced CSA approved indoor models of the Eccotemp tankless line. The included Eccotemp 4" category III, stainless steel, UL listed Horizontal Vent Kit makes installation a breeze. Additional venting may be required based on your installation. The Eccotemp 4" Horizontal Vent Kit Includes a termination hood with backflow preventer, 90-degree elbow, wall thimble, 12" straight pipe and appliance adapter.Rated at an impressive 6.8 GPM with a temperature rise of 38 degrees and 140,000 BTU per hour, the Eccotemp EL22i-NG can meet all your hot-water needs! Eccotemp's advanced 0.7 GPM low flow ignition technology allows users to enjoy endless hot water without experiencing cold spots.We recommend the Eccotemp EL22i-NG for standard size single family homes, apartments, condos, cabins, as well as smaller commercial applications. Using 2-3 hot water applications simultaneously is a breeze with the Eccotemp EL22i-NG. With our upgraded PCB (Product Control Board) performance and an all new gas modulating valve, consumers can experience best in class temperature performance with a price anyone can afford.The compact, wall mounted Eccotemp EL22i-NG has a 110/120-volt UL listed power cord that powers the internal Exhaust Fan, Anti-Freeze Protection, Digital Display and PCB. With its fully automated control system, the Eccotemp EL22i-NG only pulls about .67 amps during operation, making it an ideal for low energy consumption and efficiency. The Eccotemp EL22i has been CSA tested and approved for US & Canadian use at elevations up to 2000 feet. Installation and use of the Eccotemp EL22i above 2000 feet may affect overall product efficiency and performance. Installation and use of the Eccotemp EL22i above 5000 feet is not recommended.IMPORTANT NOTE: Cannot be used for HYDRONIC SYSTEMS, RECIRCULATING, or FLOOR HEATING.
See More +The Eccotemp 20Hi Indoor Natural Gas Tankless Water Heater is one of the most advanced CSA approved indoor models of the Eccotemp tankless line. The included Eccotemp 3" category III, stainless steel, UL listed Vertical Vent Kit makes installation a breeze. Additional venting may be required based on your installation. The Eccotemp Vertical Vent Kit Includes an adjustable flashing 0-30 degrees, storm collar, rain cap with wind band, backflow preventer, universal appliance adapter, and an in-line drain pipe. Rated at an impressive 6.0 GPM with a temperature rise of 38 degrees and 150,000 BTU per hour, the Eccotemp 20Hi-NG can meet all your hot-water needs! Eccotemp's advanced 0.7 GPM low flow ignition technology allows users to enjoy endless hot water without experiencing cold spots. We recommend the Eccotemp 20Hi-NG for standard size single family homes, apartments, condos, cabins, as well as smaller commercial applications. Using 2-3 hot water applications simultaneously is a breeze with the Eccotemp 20Hi-NG. With our upgraded PCB (Product Control Board) performance and an all new gas modulating valve, consumers can experience best in class temperature performance with a price anyone can afford. The compact, wall mounted Eccotemp 20Hi-NG has a 110/120-volt UL listed power cord that powers the internal Exhaust Fan, Anti-Freeze Protection, Digital Display and PCB. With its fully automated control system, the Eccotemp 20Hi-NG only pulls less than 3 amps during operation, making it an ideal for low energy consumption and efficiency. The Eccotemp 20Hi has been CSA tested and approved for US & Canadian use at elevations up to 2000 feet. Installation and use of the Eccotemp 20Hi above 2000 feet may affect overall product efficiency and performance. Installation and use of the Eccotemp 20Hi above 5000 feet is not recommended. IMPORTANT NOTE: Cannot be used for HYDRONIC SYSTEMS, RECIRCULATING, or FLOOR HEATING.
See More +