Installation: Application by brush or roller: 1. Mix the sealant before and periodically during application. considering the product viscosity, it is recommended to use a mixing drill. 2. With a brush or roller, apply one or two coats, depending on surface conditions and the desired effect. 3. If necessary, apply a second thin coat when the first is dry (about 24 hours).Sprayer application : 1. Mix the sealant before and periodically during application. 2. Spray sealant with a type "airless" equipment capable of developing a pressure of 3000 PSI, with a hose 1 cm (1/4 in) in diameter and a nozzle with a diameter between 19 and 25 mil. 3. If necessary, apply a second thin coat when the first is dry (about 24 hours). Dilute the sealant at a rate of 25% using a solvent. 4. Clean the sprayer immediately after application with paint thinner.
See less -