Showing 22 of 22 products
The Tubing Punch Tool is an added convenience to the drip installation process. By applying a small amount of pressure, you can put the perfect-sized hole into 1/2" drip tubing where you'll then insert a micro-sprinkler or 1/4" distribution tubing.
Easily adjust or shut off flow in 1/2 in. or 5/8 in. drip tubing runs to different sections of your plant watering area. Avoid over- or under-watering of plants with different moisture needs in the zone. Top cap turns to adjust flow. Barbed ends permit easy, leak-free insertion into drip tubing.
Ideal for connection of small drip irrigation zones and watering of container plants with available drippers and bubblers, this 3/4 in. FHT x 1/4 in. adapter allows simple attachment of 1/4 in. drip tubing to an outside faucet. Compression fitting accepts Rain Bird and most other brands of 1/4 in. drip tubing. It can be used with a pressure regulator and hose-end timer (both available separately) for added control.
1/4 in. O.D. exterior grade tubing for use in positioning spot watering emitters and other drip irrigation devices around plants. Connect with Rain Bird 1/4 in. barbed fittings and stakes. 100 foot coil that can be cut to needed lengths to water plants.