Showing 4 of 4 products
Designed for multi-season use, this rugged Rain Bird 1/2 in. emitter tubing provides dependable, uniform watering of vegetable plants, ground cover, flowers and other closely spaced plants. With 0.9 gph (gallons per hour) built-in emitters spaced every 18 in. the tubing waters evenly from beginning to end of its layout in your planting area. Just cut, place and connect in any arrangement using Rain Bird 1/2 in. barbed or easy-fit compression fittings and stakes (purchased separately). The emitters are designed for clog-resistant flow. Other professional grade quality features include extra flexibility for kink-free installation, plus unmatched resistance to chemicals, algae growth and UV damage.
1/2 in. Blank (Distribution) Tubing is used to run water from an outside faucet or other water source to the planting area. Kink resistant materials help provide dependable water flow. Connect tubing sections and 1/2 in. Emitter Tubing with Rain Bird 1/2 in. barbed or compression fittings. To place watering devices near plants, add 1/4 in. Tubing runs by tapping into the side of this 1/2 in. tubing with 1/4 in. barbed couplings.
Easily adjust or shut off flow in 1/2 in. or 5/8 in. drip tubing runs to different sections of your plant watering area. Avoid over- or under-watering of plants with different moisture needs in the zone. Top cap turns to adjust flow. Barbed ends permit easy, leak-free insertion into drip tubing.
Prevent clogging of your drip irrigation system with this simple, reliable filter. Includes stainless steel filter element that is easy to remove and rinse clean. Threaded cap has a sealing O-ring and removes easily for access to the filter. Connects to 3/4 in. threaded valves and pressure regulators.