Specialty Air Tools(12 products)

The Campbell Hausfeld get stuff done reversible air drill (XT401000) meets all the challenges of surface prep and drilling with ease. Changing bits and installing accessories are easy with the keyless chuck design. Additionally, an easy side-toggle makes moving from forward to reverse a one-handed task for convenient use. The air chuck boasts a 30 ft. Lbs maximum torque and a free speed RPM of 2, 000 to get jobs done efficiently. Drill shank range of 3/64 3/8 inch. average air consumption of 4.0 CFM @ 90 PSI. Single planetary gear type. 0.4 Horsepower. Air inlet size of < inch NPT (F). an air compressor with at least a 26 gallon tank is recommended. Get stuff done faster and easier with Campbell hausfeld-the air power expert.

The Campbell Hausfeld get stuff done straight die Grinder (XT250000) boasts the power to handle grinding, porting, smoothing, polishing and deburring with ease. With a 25, 000 free speed RPM and a .2 Horsepower motor, the XT250000 moves material quickly and efficiently. The multiple air flow adjustments allows for seamless control all you need is a Quick turn of the screwdriver! the < inch collet makes this straight die Grinder compatible with most standard bits. This die Grinder boasts a lightweight composite design (0.8 lbs.), and a rubberized, comfort grip for a user friendly experience. Average air consumption of 2.8 CFM @ 90 PSI. Maximum pressure of 90 PSI. Air inlet size of < inch NPT (F). minimum hose size of 3/8 inch. An air compressor with a tank gallon capacity of 20 gallons or larger is recommended. Get stuff done faster and easier with Campbell Hausfeld the air power expert.

The Freeman PCTN64 pneumatic concrete T-nailer drives 14-Gauge collated concrete "T" nails ranging 5/8 inch 2-1/2 inch L. The Freeman Concrete T-Nailer is designed for wood to concrete/steel applications. A lightweight die-cast aluminum body maximizes productivity by reducing operator fatigue while the anodized aluminum magazine and trigger safety lock to prevent accidental firing. Applications include furring strips, plywood to concrete nailing, wire lathe installation, steel banding, decking, fencing, subflooring and more. Density of concrete varies according to age, newer concrete being more penetrable, therefore age may dictate the depth a nail will drive through the concrete. 2-1/2 inch nails are recommended for wood to wood applications only.

The new Husky air tool line in built to industrial standards for the professional user providing more power, less noise and longer life. This new Husky 1/4 in. Angle Die Grinder Kit features low weight housing with rubberized handle over mould for comfort. Precision bearings reduce vibration and spindle run-out and internal silencing greatly reduces tool noise. The tool operates at 20,000 RPM. Designed for debarring, polishing and grinding in hard-to-reach areas. The kit includes a 2 in. surface preparation kit that allows the tool to be used for sanding and surface preparation applications.