A clogged toilet is one of the most common household plumbing problems. If your toilet overflows or flushes poorly, try clearing it with a plunger.
A plunger uses air to force clogs out of drains, so it's easy to use and doesn't damage pipes. If you use a hand snake or a closet snake – one made specifically for use inside toilets – take care that you don't bang the porcelain sides of the bowl. Porcelain is tough – up to a point. You wouldn't want to crack your toilet and end up replacing the whole thing.
|There are 2 steps to completing this project:|
|Step 1 Clearing a Toilet with a Plunger|
|Step 2 Clearing a Toilet with a Closet Snake|
1 Clearing a Toilet With a Plunger
Place the plunger over the hole in the toilet. Plunge up and down rapidly, keeping the plunger under water and lifting it only an inch or so on every upstroke. Keep doing this for a minute or two. If it doesn't clear, use a toilet auger.
2 Clearing a Toilet With a Closet Snake
Feed the end of the cable into the toilet, taking care not to scratch the bowl. Crank the handle clockwise to snag the obstruction. Continue cranking while pulling the obstruction out.