DIY Industrial Media Console

  1. Step 1 Gather Materials

    Gather Materials

    Gather materials.

  2. Step 2 Assemble Feet

    Assemble Feet

    Assemble feet by screwing flanges to the top and bottom of 1 ½” pipe.

  3. Step 3 Attach Pads

    Attach Pads

    Attach felt pad to the bottom end of each foot.

  4. Step 4 Mark, Drill and Attach Feet

    Mark, Drill and Attach Feet

    Place assembled feet at the corner of your board. Mark circle around flange as well screw holes. Drill guide holes and then attached flange with screws.  Repeat until all four feet are attached.

  5. Step 5 Flip

    Flip

    Flip over the bottom portion of the media console.

  6. Step 6 Assemble Struts

    Assemble Struts

    Assemble struts by screwing flanges to the top and bottom of the 12” pipes.

  7. Step 7 Mark, Drill and Attach Struts

    Mark, Drill and Attach Struts

    Place assembled struts at the corner of the bottom board. Mark circle around flange as well screw holes ensuring holes are misaligned with feet flanges. Drill guide holes and then attached with screws. Repeat until all four struts are attached.

  8. Step 8 Flip and Attach Struts

    Flip and Attach Struts

    Flip and attach top board by repeating step 7.

  9. Step 9 Enjoy

    Enjoy

    Fill and Enjoy.

What You Need for This Project

Related Resources