BUY ONLINE PICK UP IN-STORE Available for in-store products only. Learn More ›

Gardner Bender

Model # HST-WP | Store SKU # 1000150078
-

Butt Splice Connector Kit 8-14 AWG; 1/Cd

- / Each

-

Butt Splice Connector Kit 8-14 AWG; 1/Cd
  • Gardner Bender
  • Model # HST-WP
  • Store SKU # 1000150078
  • 0
Butt Splice Connector Kit 8-14 AWG; 1/Cd
- / each
Top

Overview Model # HST-WP Store SKU # 1000150078

Butt Splice Kit is used for waterproof repair of well pipe cables and splices of stranded cable #14 - #8 AWG. Connector set screws engage each wire for a secure splice. Assures safe and permanent connections. Easy to use polyolefin seals with heat gun or torch eliminating messy epoxies, tapes or mastics. Instructions: Slide heat shrink tubing over one conductor. Remove 5/8" insulation from conductors to be spliced. Insert stripped conductor in the butt splice. Tighten set screw to the lb per inch recommendations on the packaging and check for continuity of wire. Move heat shrink tube over splice and center. Heat tubing with torch or heat gun (MSTR-TORCH). Tubing shrinks at 350° F. Start in the middle of the tube, apply heat moving lengthwise back and forth over tubing. DO NOT TRAP AIR IN MIDDLE OF SPLICE KIT. When tubing has assumed the splice configuration and mastic seal is visible on each end of tubing, discontinue heating.

  • Use above or below ground
  • Waterproof and corrosion resistant seal
  • Rated at 600 V max.
  • Temp. Rating: 105° C (221° F) Max.

Specifications

Dimensions

Assembled Depth (in inches) 0.50 Assembled Height (in inches) 7.50
Assembled Weight (In LBS) 0.05 Assembled Width (in inches) 3.70
Item Depth 5.10 Item Height 7.90
Item Weight 0.35 Item Width 4.20

Details

Country of Origin US-United States

Warranty / Certifications

For more information please call 1-800-268-4987.

Customer Reviews

Customer Reviews

Questions and Answers

Top