BUY ONLINE PICK UP IN-STORE Available for in-store products Learn More ›

Stiebel Eltron

Model # DHC-E 8/10 | Store SKU # 1000782323

DHC-E 8/10 9.6 KW Point of Use Tankless Electric Water Heater

- / each

Estimated Ship Time: 7 - 12 Days

DHC-E 8/10 9.6 KW Point of Use Tankless Electric Water Heater
  • Stiebel Eltron
  • Model # DHC-E 8/10
  • Store SKU # 1000782323
  • 1
DHC-E 8/10 9.6 KW Point of Use Tankless Electric Water Heater
- / each

Overview Model # DHC-E 8/10 Store SKU # 1000782323

Stiebel Eltron has been a world leader in advanced water heating technology for almost 90 years. Our engineering excellence and high-quality manufacturing results in products fulfilling the highest expectations of performance & reliability. DHC-E tankless models are 99% efficient, heating water instantaneously and endlessly and, unlike tank water heaters, have no stand-by energy losses. No venting is necessary. The compact, space-saving European design gives the flexibility to install in the best location. A DHC-E 8/10 is ideal for residential and commercial point-of-use hand-washing sink applications including: bathrooms, cabins, offices, stores, warehomes, and restaurants. The DHC-E 8/10 is electronically controlled and can be set to deliver water at the temperature desired. The number of sinks a DHC-E 8/10 can supply depends on the incoming cold water temperature, the water flow through the unit, whether supply voltage is 208 or 240 volts, and which power output the unit is set to.

  • Professional installation recommended
  • Refer to the DHC-E Sizing Guide to determine model suitability, especially for whole house use; call Stiebel Eltron at 800.582.8423 with any sizing questions
  • DHC-E 8/10 tankless electric water heaters provide hot water for multiple low- or medium-flow sinks
  • DHC-E 8/10 models are set to 7.2 kW or 9.6 kW at installation via a jumper
  • DHC-E 8/10 models require 208 or 240 volt electric service, 1 dedicated 40 amp breaker at the 7.2 kW setting or 50 amp breaker at the 9.6 kW setting, 8 gauge copper wiring, and have 1/2 NPT plumbing connections
  • DHC-E 8/10 units installed at 9.6 kW will give these flow rates: 1.87 gpm @ 35 degrees F, 1.46 gpm @ 45 deg. F, 0.85 gpm @ 77 deg. F; and 1.41 gpm @ 35 deg. F, 1.09 gpm @ 45 deg. F, 0.64 gpm @ 77 deg. F if installed at 7.2 kW




Assembled Depth (in inches) 4.1 Assembled Height (in inches) 14.2
Assembled Weight (In LBS) 5.9 Assembled Width (in inches) 8
Item Depth 19 Item Height 5.5
Item Weight 5.5 Item Width 9.5


Certified Yes Country of Origin US-United States
UPC Code (no spaces or dashes) 094922058454

Warranty / Certifications

For warranty information on this product, please call our Internet Customer Service Center at 1-800-435-4654.
Customer Reviews

Customer Reviews

Customer Reviews

Questions and Answers