Model # HTP-1010
Store SKU # 1000104039
This high quality silicone self-sealing tape insulates all shapes of conductors to 400 V. 1 roll is 1-inch W x 10 ' L (2.54cm W x 3.05 m L) Installation instructions: Thoroughly clean area to be wrapped. Remove Mylar liner as tape is installed using caution to keep tape surface clean. Begin wrap with one full overlap of tape onto itself with minimal stretch. Stretch tape to 3/4 normal width on subsequent wraps while half-lapping. On each half lap, match edge of tape to center guideline to previous layer. At end of area to be wrapped wrap one full turn of tape onto itself as if beginning step with minimal stretch. This will insure tight adhesion. Total curing will occur in 24 hours at room temperature.
- Insulates and seals surfaces from -65° C to 260°C (-85° - 500°F).
- Fuses to itself in seconds to stay watertight
- Permanent mould in 24 hours or in minutes with heat application
- UL Listed/Certified
- Weather resistant -49°C to 392°C (-49°F - 392°F)