\n

\n\n\n\n\n \n\n\n \n","bvRatingsSummary":"\n\n\n\n ## \n Can this product be used in an exterior environment and is it UV resistant without becoming britt...\n

\n

\n \n Can this product be used in an exterior environment and is it UV resistant without becoming brittle, drying out and cracking. My specific use would be to join and seal the ends of 3.5 mm double wall green house material.\n

\n \n\n \n This moulding is for interior use only, and it is not UV resistant.\n

\n \n Date published: 2019-06-01

\n \n ## \n Will This Accommodate 1/4" Thick Material?\n

\n

\n \n Will This Accommodate 1/4" Thick Material?\n

\n \n\n \n I melted mine down to make a canoe. I think if you tried hard enough you could do it. Maybe a little lube. Anything is a suppository if you try hard enough.\n

\n \n Date published: 2020-04-18

\n \n ## \n Does this make a water tight seal\n

\n

\n \n Or donyou have to put caulking in groves to make water tight seal\n

\n \n\n \n For a water tight seal you would half to add a water proof caulking then lay in the FRP board. Without the caulking some water could still travel down the seam and get behind it depending on the amount of water. We use them at hotels for around chemical dispensers, mop sinks, kitchens, etc. it is a great product.\n

\n \n Date published: 2019-06-01

\n \n ## \n can this be used for paneling?\n

\n

\n \n can this be used for paneling?\n

\n \n\n \n yes\n

\n \n Date published: 2020-09-09

\n \n ## \n this product came with the barcode printed directly on it every 2' or so. looks pretty unsightly...\n

\n

\n \n this product came with the barcode printed directly on it every 2' or so. looks pretty unsightly. any suggestions on how to remove it?\n

\n \n\n \n MEK removes ink from video jet type printers using MEK solvent Based INK. Check on back first to make sure it doesn't effect the paneling (melting) I only found printing on back of mine\n

\n \n Date published: 2020-04-17

\n \n ## \n Need this in gray so it matches the panels im ordering\n

\n

\n \n \n

\n \n\n \n ## \n is this available for 1/2" thick panels? by special order?\n

\n

\n \n is this available for 1/2" thick panels? by special order?\n

\n \n\n \n ## \n can I get these in grey the color of the paneling?\n

\n

\n\n can I get these in grey the color
of the paneling?\n

\n \n\n \n Divider Bar PVC White Moulding 8 Ft. is rated\n out of\n 5 by\n 42.\n

\n\n\n\n\n\n \n\n \n","bvReviews":"\n\n\n\n\n\n

\n\n\n\n\n \n\n \n"}\n \n Rated 4 out of\n 5\n by\n DANIEL from\n worked perfectly for the panels I installed....\n worked perfectly for the panels I installed.\n

\n Date published: 2020-11-25

\n \n \n \n Rated 5 out of\n 5\n by\n TLmodder04 from\n FRP CONNECTOR\n This worked great and was a pefect fit for connecting two .090 FRP panels together.\n

\n Date published: 2020-10-31

\n \n \n \n Rated 5 out of\n 5\n by\n ROYAL from\n Connected FRP perfectly...\n Connected FRP perfectly\n

\n Date published: 2020-08-26

\n \n \n \n Rated 4 out of\n 5\n by\n Mad from\n Difficult to install but looks nice between the panels....\n Difficult to install but looks nice between the panels.\n

\n Date published: 2020-08-15

\n \n \n \n Rated 3 out of\n 5\n by\n Dagwood from\n Good Product\n Moulding is good but hard to insert caulking to ensure a good seal.\n

\n Date published: 2020-08-14

\n \n \n \n Rated 5 out of\n 5\n by\n Bob from\n Worked like a champ...\n Worked like a champ\n

\n Date published: 2020-07-22

\n \n \n \n Rated 1 out of\n 5\n by\n HomeDepotCustomer from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2020-06-24

\n \n \n \n Rated 5 out of\n 5\n by\n Dolly from\n Very good. Love it\n Very good. Love it\n

\n Date published: 2020-06-09

\n \n \n \n Rated 4 out of\n 5\n by\n HomeDepotCustomer from\n it was o.k. for the purpose that i used it...\n it was o.k. for the purpose that i used it for. but it was very flimsy, eg: o.k. to use on a wall but not easy to use overhead !!\n

\n Date published: 2020-06-02

\n \n \n \n Rated 5 out of\n 5\n by\n monkthis from\n easy to work with\n easy to work with\n

\n Date published: 2020-05-12

\n \n \n \n Rated 5 out of\n 5\n by\n Pat from\n Was trying to use it to connect underlayment wood panels together. But the openings are to narrow...\n Was trying to use it to connect underlayment wood panels together. But the openings are to narrow. I guess this only fits only specific panels. Other than this solid product.\n

\n Date published: 2020-05-08

\n \n \n \n Rated 5 out of\n 5\n by\n Oswaldo from\n Good product 5 stars ...\n Good product 5 stars\n

\n Date published: 2020-04-22

\n \n \n \n Rated 5 out of\n 5\n by\n Coop from\n Easy works as it should\n Easy works as it should\n

\n Date published: 2020-03-31

\n \n \n \n Rated 5 out of\n 5\n by\n Shopper from\n works well\n good for what it was used for......................\n

\n Date published: 2020-03-21

\n \n \n \n Rated 5 out of\n 5\n by\n Virgilio from\n Great fit...\n Great fit\n

\n Date published: 2020-03-10

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2019-12-25

\n \n \n \n Rated 1 out of\n 5\n by\n HomeDepotCustomer from\n It will not fit more than 1/4” plywood...\n It will not fit more than 1/4” plywood\n

\n Date published: 2019-12-24

\n \n \n \n Rated 5 out of\n 5\n by\n Darryl from\n Works perfectly for the connection between the two sheets of...\n Works perfectly for the connection between the two sheets of wall board\n

\n Date published: 2019-10-30

\n \n \n \n Rated 5 out of\n 5\n by\n Laatdillon from\n Makes it easy...\n Makes it easy\n

\n Date published: 2019-09-10

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n 5 Star Review\n Rating provided by a verified purchaser\n

\n Date published: 2019-08-28

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n 5 Star Review\n Rating provided by a verified purchaser\n

\n Date published: 2019-08-22

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n 5 Star Review\n Rating provided by a verified purchaser\n

\n Date published: 2019-06-26

\n \n \n \n Rated 1 out of\n 5\n by\n HomeDepotCustomer from\n The space between the front and back was so tight...\n The space between the front and back was so tight it made it difficult to make it fit. At one point I had to cut the back side off so it would go over the face of the sheeting. I would not use this brand again.\n

\n Date published: 2019-05-08

\n \n \n \n Rated 1 out of\n 5\n by\n HomeDepotCustomer from\n They did not fit properly ...\n They did not fit properly\n

\n Date published: 2019-03-05

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n 5 Star Review\n Rating provided by a verified purchaser\n

\n Date published: 2019-02-21

\n \n \n \n Rated 3 out of\n 5\n by\n HomeDepotCustomer from\n 3 Star Review\n Rating provided by a verified purchaser\n

\n Date published: 2019-02-07

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n 5 Star Review\n Rating provided by a verified purchaser\n

\n Date published: 2019-02-07

\n \n \n \n Rated 3 out of\n 5\n by\n Leofric from\n 3 Star Review\n Rating provided by a verified purchaser\n

\n Date published: 2019-02-05

\n \n \n \n Rated 5 out of\n 5\n by\n Wayne67 from\n Perfect fit ...\n Perfect fit\n

\nDate published: 2018-12-26

\n \n