\n 3/32-inch Diamond Wheel Taper Point Rotary Bit for Wood, Jade, Ceramic, Glass, Hardened Steel, and Semi Precious Stones is rated\n out of\n 5 by\n 109.\n

\n\n\n\n\n\n\n \n\n \n","bvReviews":"\n\n\n\n\n\n

\n\n\n\n\n\n\n\n \n\n \n"}\n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2020-06-03

\n \n \n \n Rated 4 out of\n 5\n by\n Keera from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2020-06-03

\n \n \n \n Rated 5 out of\n 5\n by\n Ronc32 from\n Priced right and does the job. All that can ask.\n Priced right and does the job. All that can ask.\n

\n Date published: 2020-05-20

\n \n \n \n Rated 5 out of\n 5\n by\n Ronald from\n Great...\n Great\n

\n Date published: 2020-04-15

\n \n \n \n Rated 5 out of\n 5\n by\n Ronald from\n Great...\n Great\n

\n Date published: 2020-04-15

\n \n \n \n Rated 1 out of\n 5\n by\n HomeDepotCustomer from\n Be very careful with this bit. If it is...\n Be very careful with this bit. If it is not submerged in water (bit, not tool), and overheats, even once, it will be ruined. I was drilling beach glass and my water level did not quite cover the piece, the bit overheated, and that was it. Done. Only 3 pieced drilled.\n

\n Date published: 2020-04-15

\n \n \n \n Rated 5 out of\n 5\n by\n RDC from\n I used this tool the clean up some thin-set between...\n I used this tool the clean up some thin-set between small tiles before applying grout. The best answer to this challenging little chore. I tried cheaper versions from the discount chains and these broke at high speed and dangerously. This is costly and worth it.\n

\n Date published: 2020-03-31

\n \n \n \n Rated 2 out of\n 5\n by\n HomeDepotCustomer from\n Worked very slowly. Chose another way to accomplish my project....\n Worked very slowly. Chose another way to accomplish my project.\n

\n Date published: 2020-03-31

\n \n \n \n Rated 3 out of\n 5\n by\n HomeDepotCustomer from\n The diamond wheel point didn't last very long while sanding...\n The diamond wheel point didn't last very long while sanding a rough edge of a mirror.\n

\n Date published: 2020-03-04

\n \n \n \n Rated 5 out of\n 5\n by\n Tessie from\n Its good but they Should have a set of this...\n Its good but they Should have a set of this for different sizes.\n

\n Date published: 2020-03-03

\n \n \n \n Rated 1 out of\n 5\n by\n hank from\n broke the glass\n broke the glass\n

\n Date published: 2020-03-03

\n \n \n \n Rated 1 out of\n 5\n by\n Justin from\n It broke after 30 mins of use...\n It broke after 30 mins of use\n

\n Date published: 2020-02-19

\n \n \n \n Rated 1 out of\n 5\n by\n RAMNM from\n Does not fit the dremel Threw them away\n Does not fit the dremel\r\nThrew them away\n

\n Date published: 2020-01-29

\n \n \n \n Rated 5 out of\n 5\n by\n Rusty from\n had to elongate a hole in a glass tile and...\n had to elongate a hole in a glass tile and it worked better than expected\n

\n Date published: 2020-01-28

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2020-01-22

\n \n \n \n Rated 5 out of\n 5\n by\n Vern from\n Dremel makes excellent products. They make the best rotary tool!!...\n Dremel makes excellent products. They make the best rotary tool!!\n

\n Date published: 2020-01-21

\n \n \n \n Rated 4 out of\n 5\n by\n tee from\n Purchased to make holes in a glass vase & it...\n Purchased to make holes in a glass vase & it worked just as I hoped. Glass vase was submerged in water and held down on a soft paper towel base to cushion vibration as the drill bit tip was also under water at the contact point with the glass. I made 4 holes thru the the thin round surface\n

\n Date published: 2020-01-07

\n \n \n \n Rated 5 out of\n 5\n by\n Phil from\n Easy to use. Quality product. ...\n Easy to use. Quality product.\n

\n Date published: 2020-01-07

\n \n \n \n Rated 1 out of\n 5\n by\n HomeDepotCustomer from\n It broke the first time I used it...\n It broke the first time I used it\n

\n Date published: 2019-12-31

\n \n \n \n Rated 5 out of\n 5\n by\n BiggDogg30127 from\n Works great!\n Works great!\n

\n Date published: 2019-12-11

\n \n \n \n Rated 5 out of\n 5\n by\n Alex from\n Used the bit to cut glass tile on a backsplash...\n Used the bit to cut glass tile on a backsplash for my outlets. Worked like a charm\n

\n Date published: 2019-12-10

\n \n \n \n Rated 5 out of\n 5\n by\n RichMan from\n I used it to grind hardened aluminum and it worked fine.\n I used it to grind hardened aluminum and it worked fine.\n

\n Date published: 2019-12-10

\n \n \n \n Rated 5 out of\n 5\n by\n ambro666 from\n Works perfectly for small precise grinding jobs...\n Works perfectly for small precise grinding jobs\n

\n Date published: 2019-12-10

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n Perfect for the quick home dentistry project...\n Perfect for the quick home dentistry project\n

\n Date published: 2019-11-05

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n 5 Star Review\n Rating provided by a verified purchaser\n

\n Date published: 2019-10-31

\n \n \n \n Rated 5 out of\n 5\n by\n ProblemSolver from\n only tool that did the trick to remove a broken tap!\n only tool that did the trick to remove a broken tap!\n

\n Date published: 2019-10-29

\n \n \n \n Rated 5 out of\n 5\n by\n gerrit from\n works great.\n works great.\n

\n Date published: 2019-10-23

\n \n \n \n Rated 5 out of\n 5\n by\n sam from\n 5 Star Review\n Rating provided by a verified purchaser\n

\n Date published: 2019-10-20

\n \n \n \n Rated 3 out of\n 5\n by\n HomeDepotCustomer from\n Far too powerful for a kid which is what I...\n Far too powerful for a kid which is what I asked for\n

\n Date published: 2019-10-08

\n \n \n \n Rated 5 out of\n 5\n by\n perfect from\n worked really well to sharpen edge of wood carving....\n worked really well to sharpen edge of wood carving.\n

\nDate published: 2019-10-08

\n \n