\n

\n\n\n\n\n \n\n\n \n","bvRatingsSummary":"\n\n\n\n ## \n Does this jig allow for routing hinge mortise on full jambs or jambs where door stop is already a...\n

\n

\n \n Does this jig allow for routing hinge mortise on full jambs or jambs where door stop is already attached to the jamb?\n

\n \n\n \n It is best to have the stops in place for easy and accurate positioning.\n

\n \n Date published: 2021-09-14

\n \n ## \n Will this jig work with an EXTERIOR DOOR JAMB WHERE 3-SIDES OF THE JAMB HAS A RABBET IN IT for re...\n

\n

\n \n Will this jig work with an EXTERIOR DOOR JAMB WHERE 3-SIDES OF THE JAMB HAS A RABBET IN IT for receiving the exterior door?\n

\n \n\n \n haven't had that task. but when there's a will there's a way\n

\n \n Date published: 2019-10-01

\n \n ## \n Will any router work ?\n

\n

\n\n \n

\n \n\n \n Any full size router with 5 or 6 inch base\n

\n \n Date published: 2017-08-06

\n \n 2-1/2-inch x 6-inch Single Hinge Template is rated\n out of\n 5 by\n 82.\n

\n\n\n\n\n\n\n \n\n \n","bvReviews":"\n\n\n\n\n\n

\n\n\n\n\n\n\n\n \n\n \n"}\n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n this is a worthwhile tool. Deffinately worth the money. ...\n this is a worthwhile tool. Deffinately worth the money. Makes door work simple\n

\n Date published: 2020-06-16

\n \n \n \n Rated 5 out of\n 5\n by\n Handyman from\n Good quality.Thanks...\n Good quality.Thanks\n

\n Date published: 2020-06-09

\n \n \n \n Rated 4 out of\n 5\n by\n Bdg from\n Used it on four doors.Worked very well....\n Used it on four doors.Worked very well.\n

\n Date published: 2020-05-30

\n \n \n \n Rated 5 out of\n 5\n by\n Anonymous from\n Was able to complete 5 doors without any issues. Works very well.\n Was able to complete 5 doors without any issues. Works very well.\n

\n Date published: 2020-05-20

\n \n \n \n Rated 4 out of\n 5\n by\n HomeDepotCustomer from\n the bit dulled quickly...\n the bit dulled quickly\n

\n Date published: 2020-05-06

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n easy to use for first time user....\n easy to use for first time user.\n

\n Date published: 2020-05-01

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n Product performed job perfectly...\n Product performed job perfectly\n

\n Date published: 2020-05-01

\n \n \n \n Rated 4 out of\n 5\n by\n Paul from\n Had nine doors to put hinges on. Practiced on one...\n Had nine doors to put hinges on. Practiced on one of the doors l was getting rid of. Bought doors with handle holes and made a round plug to line up the old with the new door. Transfered the hinge location, mounted the gage and cut out the hinge pocket. Came out right 27 times.\n

\n Date published: 2020-04-23

\n \n \n \n Rated 5 out of\n 5\n by\n Leau from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2020-04-22

\n \n \n \n Rated 4 out of\n 5\n by\n HomeDepotCustomer from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2020-04-22

\n \n \n \n Rated 4 out of\n 5\n by\n Jim from\n The jig worked great but the bit went dull right...\n The jig worked great but the bit went dull right after the first mortise, only used it on a door jamb didnt hit anything other than whatever these jambs are made of these days bit started burning after first mortise.\n

\n Date published: 2020-04-22

\n \n \n \n Rated 2 out of\n 5\n by\n Leo from\n Should have vise like holding instead of nails which...\n Should have vise like holding instead of nails which gets lost.\n

\n Date published: 2020-04-16

\n \n \n \n Rated 5 out of\n 5\n by\n tom from\n worked well for me\n worked well for me\n

\n Date published: 2020-04-13

\n \n \n \n Rated 5 out of\n 5\n by\n Osprey from\n If you're planning on using it for commercial work (ie...\n If you're planning on using it for commercial work (ie doing doors daily) it's not that kind of construction, but for the occasional door install don't even waste your time on chisels. This does a much nicer and easier job. Excellent value, even comes with the router bit!\n

\n Date published: 2020-04-08

\n \n \n \n Rated 5 out of\n 5\n by\n Al from\n This product did exactly what I was expecting it to at a very reasonable price.\n This product did exactly what I was expecting it to at a very reasonable price.\n

\n Date published: 2020-04-07

\n \n \n \n Rated 5 out of\n 5\n by\n Richard from\n Easy to use and safe...\n Easy to use and safe\n

\n Date published: 2020-03-31

\n \n \n \n Rated 4 out of\n 5\n by\n Anonymous from\n Easy to set up and to use. Works great. ...\n Easy to set up and to use. Works great.\n

\n Date published: 2020-03-31

\n \n \n \n Rated 5 out of\n 5\n by\n Ke51n from\n Worked great after I figures out how to change from...\n Worked great after I figures out how to change from left to right handed hinges. Instructions are lacking. However the template worked great. Much bette than cutting fee hand. Well worth the price\n

\n Date published: 2020-03-10

\n \n \n \n Rated 5 out of\n 5\n by\n BB from\n EASY TO USE, WORKED WELL ON EIGHT NEW WOOD DOORS.THE ROUTER BIT CUT 16 ACCURATE HINGE MORTISES.\n EASY TO USE, WORKED WELL ON EIGHT NEW WOOD DOORS.THE ROUTER BIT CUT 16 ACCURATE HINGE MORTISES.\n

\n Date published: 2020-03-10

\n \n \n \n Rated 5 out of\n 5\n by\n Iron from\n I had one years ago but lost most of the...\n I had one years ago but lost most of the parts. It worked great for larger base routers back then.\n

\n Date published: 2020-02-19

\n \n \n \n Rated 5 out of\n 5\n by\n DAVID from\n This is by far the best hinge template I’ve found...\n This is by far the best hinge template I’ve found and I’ve bought and tried several different ones-they all were returned-either too complicated-like the ones with 20-30 parts or too flimsy. This one is very simple to use and to adjust and has 5 parts including the 2 double headed nails. Excellent!\n

\n Date published: 2020-02-12

\n \n \n \n Rated 5 out of\n 5\n by\n Ozzy from\n Works great. Use with any router.\n Works great. Use with any router.\n

\n Date published: 2020-02-11

\n \n \n \n Rated 2 out of\n 5\n by\n Donald H from\n Sloppy fits after\n Sloppy fittings after routing. Corner chisel should come with it, as I can't remember ever seeing a hinge with that radius, at least not in Canada. Not impressed, but has some features that are better than the old one. Also the back doesn't stay true. Too flexible.\n

\n Date published: 2020-02-11

\n \n \n \n Rated 3 out of\n 5\n by\n Eman from\n The gauge for a 1 3/8" door doesn't allow the router to get as close to the stop side of the door...\n The gauge for a 1 3/8" door doesn't allow the router to get as close to the stop side of the door as a prehung door hinge does. Some adjustment of the hinges is necessary to keep the door from rubbing the stop. If you use the template on both the door and jamb, it will work fine.\n

\n Date published: 2019-12-25

\n \n \n \n Rated 1 out of\n 5\n by\n salut from\n the router bit is very soft. could not even finish...\n the router bit is very soft. could not even finish one cut\n

\n Date published: 2019-12-17

\n \n \n \n Rated 5 out of\n 5\n by\n fleck from\n bigger than i'm used but works great\n bigger than i'm used but works great\n

\n Date published: 2019-10-01

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n Easy to use worked great...\n Easy to use worked great\n

\n Date published: 2019-09-24

\n \n \n \n Rated 3 out of\n 5\n by\n Jumpinjoe from\n Worked well but the router bit was junk and burned trying to cut 3 hinges on jamb. Recommend buyi...\n Worked well but the router bit was junk and burned trying to cut 3 hinges on jamb. Recommend buying a decent router bit\n

\n Date published: 2019-08-20

\n \n \n \n Rated 4 out of\n 5\n by\n Lynda from\n Easy to use after getting familiar\n Had this product for years, have used it for many doors and frames with great success!\n

\n Date published: 2019-08-14

\n \n \n \n Rated 5 out of\n 5\n by\n TimAllen77 from\n Routing for hinges\n This is the 3rd or 4th template that I've purchased over the last 20 plus years. I hope that Porter Cable never stops making them.\n

\nDate published: 2019-07-25

\n \n