\n

\n\n\n\n\n \n\n\n \n","bvRatingsSummary":"\n\n\n\n ## \n My shop vac hose fitting and the vac port measures 2 1/4". There is some confusion regarding hose sizes. Will this 2 /2" hose fit?\n

\n

\n\n \n

\n \n\n \n The 2 1/2" diameter size is a fairly standard size for wet/dry vacs and I have never seen a 2 1/4" vac inlet or hose.
If you have a Shop Vac or RIDGID with a larger capacity, this hose will fit.\n

\n \n Date published: 2020-11-30

\n \n 1-7/8 in. x 7 ft. Tug-A-Long Universal Flexible Vacuum Hose & Hose Adapter for Wet/Dry Shop Vacuums is rated\n out of\n 5 by\n 606.\n

\n\n\n\n\n\n\n \n\n \n","bvReviews":"\n\n\n\n\n\n

\n\n\n\n\n\n\n\n \n\n \n"}\n \n Rated 5 out of\n 5\n by\n Skramo from\n Good Quality - 20ft length is awesome!\n Got this to replace a lost shop vac hose. Came with several different adapters and fit a shop vac perfectly. The 20ft length is a bit of a heavy coil to deal with, but better than hauling around the main vac. Quality is good and I am totally satisfied with my purchase. Shipping was a bit longer than I anticipated...but well worth the wait.\n

\n Date published: 2017-06-25

\n \n \n \n Rated 4 out of\n 5\n by\n Sagebrush from\n Great produce by itself !\n Fits well by itself but trying to connect it to other holes is an exercise in frustration. It is a case where adaptors are close but not quit close enough, either too loose or must be forced together. Either way joint is easily separated in use. Almost need Duct tape.\n

\n Date published: 2022-08-26

\n \n \n \n Rated 4 out of\n 5\n by\n Pistol Pete from\n As expected\n What can I say, it's a hose....Does it's job, maybe could be designed a bit better like being easier to stay unrolled and the ribs on the outside are abrasive if pulling around a corner while the ones on the inside hold lots of material especially if wet.\n

\n Date published: 2017-11-28

\n \n \n \n Rated 4 out of\n 5\n by\n kelvin from\n Good Buy & a great bargain!\n Does what it should. A better accessory would be an inline hose swivel.Such a long hose is great for reaching around the shop but gets twisty.hose ends/insert don't pivot as well as a swivel would.I am considering a hose reel, to keep from under foot.\n

\n Date published: 2018-05-25

\n \n \n \n Rated 3 out of\n 5\n by\n Jon S from\n Not perfect, but does the job.\n It falls off once and a while, the clasp isn't as strong as the original hose's clasp. It does flex a lot better than the useless original hose that kinks at the connection point. This product has allowed me to keep using my old vacuum at least.\n

\n Date published: 2021-03-30

\n \n \n \n Rated 5 out of\n 5\n by\n Trevoracus from\n A giant time saver.\n I am really happy with this. I am using this as part of my dust collection setup with a Dust Deputy (cyclone into a 5 gal bucket) and after a few hours day of ripping cedar I had a bucket full of saw dust and a clean vacuum. \r\n\r\nGet it.\n

\n Date published: 2018-02-26

\n \n \n \n Rated 4 out of\n 5\n by\n N E Body from\n Expensive but works\n Fits my old Ridgid WD14500. Minimal loss of suction. My only complaint is that it's been coiled up in the box so long it won't straighten out and keeps getting tangled, but that might fix itself when the weather gets warmer.\n

\n Date published: 2022-02-28

\n \n \n \n Rated 5 out of\n 5\n by\n SlopedHouse from\n Gutters\n I bought this alongside the leaf gutter tubes and they are worth their weight in gold. What was once questionably safe ladder work is now 5 minutes of vacuuming. One of the better purchases I've made towards domestic bliss.\n

\n Date published: 2022-03-10

\n \n \n \n Rated 5 out of\n 5\n by\n still new from\n Good quality\n Even though the vacuum follows behind very well this extra length of hose really allows you to get into areas without having the vacuum right beside you. Makes it easier to reach higher places.\n

\n Date published: 2019-07-08

\n \n \n \n Rated 5 out of\n 5\n by\n Wally from\n Truly universal vacuum hose\n This hose (with attachments) fits perfectly on my Shopvac brand vacuum, as well as my Ridgid thickness planer and my Kobalt table saw. It is robust and does not kink. Very glad I bought it!\n

\n Date published: 2020-08-24

\n \n \n \n Rated 4 out of\n 5\n by\n Chris from\n Good deal\n Its a hose, but did exacrly what i needed. I didnt need the adapters but the overall size was great when paired with the angled nozzels for my 2 story house. Good value.\n

\n Date published: 2019-06-25

\n \n \n \n Rated 4 out of\n 5\n by\n Animal lover from\n Why get it\n This extension allows me to do over half the main floor with vacuum being left out on the deck.noise level is gone and animal dander is not blowing around from exhaust\n

\n Date published: 2017-12-19

\n \n \n \n Rated 1 out of\n 5\n by\n JeanMarc from\n Not the right size for my RIGID vac\n Bought this to fit a RIGID shop vac, none of the adaptors were the required size and the hose had a kink in it. Think I'll stick with Shop-Vac for all future needs.\n

\n Date published: 2021-03-03

\n \n \n \n Rated 5 out of\n 5\n by\n Howard from\n Good for he price\n Does the job: as part of small shop dust collection. Doesn't fit an older Rigid 2-in-1 vac n blower, so needs to keep the original connector to the vac.\n

\n Date published: 2021-07-04

\n \n \n \n Rated 5 out of\n 5\n by\n Dizzytizzy from\n Exactly As Original.\n My Ridgid vac hose was worn through in many areas. I bought this hose as a replacement. It was the exact hose as the original. Excellent puchase.\n

\n Date published: 2023-03-19

\n \n \n \n Rated 5 out of\n 5\n by\n Woody from\n Works great\n I don’t know what else to expect out of a vacuum hose but this one sucks!\r\nIt recovers instantly after being stepped on and doesn’t kink!\n

\n Date published: 2019-02-03

\n \n \n \n Rated 5 out of\n 5\n by\n Jérémie from\n C'est un tuyau quoi.\n Ça fait ce que ça dit que ça fait, ça aspire.\r\nBien solide, mais flexible.\r\nSuper long, parfait pour se rendre partout dans mon atelier!\n

\n Date published: 2022-03-18

\n \n \n \n Rated 5 out of\n 5\n by\n alexamyanbowensmom from\n Works great\n Bought this to clean out our ducts. Works great. Thought the length would reduce suction but it didn't. Very happy with our purchase.\n

\n Date published: 2019-02-06

\n \n \n \n Rated 5 out of\n 5\n by\n BrOwen from\n Great product\n Very happy with this purchase. \r\nNo longer vacuuming the shop with the vacuum right at my feet. \r\nCan’t beat the price either.\n

\n Date published: 2018-12-18

\n \n \n \n Rated 4 out of\n 5\n by\n Arobase from\n Ceiling work with extention\n Work perfect on small shop vac. Size 2.5 inches is more heavy to pull when working on ceiling but really helpfull.\n

\n Date published: 2019-07-26

\n \n \n \n Rated 3 out of\n 5\n by\n BRian N from\n Compatibility\n Needs an adapter to connect to the smaller diameter hose and parts which do not connect to the larger 2.5” hose.\n

\n Date published: 2021-02-09

\n \n \n \n Rated 5 out of\n 5\n by\n Hattrick from\n Great Hose\n A great length when vacuuming inside our vehicles, or around my workshop without having to move the vacuum around.\n

\n Date published: 2021-11-12

\n \n \n \n Rated 1 out of\n 5\n by\n Jack from\n A Total Waste of Time and Money\n Product arrived damaged. Even without the damage, none of the included adaptors fit the hose. Returned.\n

\n Date published: 2018-10-24

\n \n \n \n Rated 1 out of\n 5\n by\n dalewg from\n Missing adaptors\n Just purchased this item. It does not come with adaptors as advertised. Will have to return for refund.\n

\n Date published: 2019-10-09

\n \n \n \n Rated 5 out of\n 5\n by\n Normand from\n Très bon achat...\n Vraiment pratique dans l'atelier pour relier l'aspirateur aux outils faisant de la poussière\n

\n Date published: 2022-04-11

\n \n \n \n Rated 3 out of\n 5\n by\n Had to make adjustments from\n Universal Wet/Dry Vacuum Hose\n Okay, but requires tape to make connections more snug otherwise air pressure blows it apart.\n

\n Date published: 2021-10-20

\n \n \n \n Rated 5 out of\n 5\n by\n John from\n Dust stopper\n Great product, works as it should, \r\nBought a second one for the second ridgid vacuum.\n

\n Date published: 2022-03-08

\n \n \n \n Rated 5 out of\n 5\n by\n Matt from\n Good hose for $$$\n good value, hose takes a bit for the curl to work out but seems sturdy and well made.\n

\n Date published: 2018-11-29

\n \n \n \n Rated 5 out of\n 5\n by\n Claude from\n Une rallonge pratique\n vraiment utile pour les travaux dans la maison. S'adapte tres bien à un shopvac\n

\n Date published: 2021-02-21

\n \n \n \n Rated 5 out of\n 5\n by\n Avonmorewarrior from\n Fits like a charm\n Love the extra lengh,,better than original,,well worth it, great price\n

\nDate published: 2017-07-31

\n \n