\n Adjustable Hole Saw is rated\n out of\n 5 by\n 346.\n

\n\n\n\n\n\n\n \n\n \n","bvReviews":"\n\n\n\n\n\n

\n\n\n\n\n\n\n\n \n\n \n"}\n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2020-12-13

\n \n \n \n Rated 2 out of\n 5\n by\n HomeDepotCustomer from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2020-12-13

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2020-12-13

\n \n \n \n Rated 4 out of\n 5\n by\n HomeDepotCustomer from\n Does what it’s intended to do. It does have preset...\n Does what it’s intended to do. It does have preset notches which makes it difficult to adjust to odd settings.\n

\n Date published: 2020-12-13

\n \n \n \n Rated 3 out of\n 5\n by\n sdp777 from\n The cutter have an allen screw to lock them in...\n The cutter have an allen screw to lock them in place but twice I've had them slide. The hole tends to gets move oval and the bin while helpful, unless holding tight to ceiling or surface, particles still fall.\n

\n Date published: 2020-12-12

\n \n \n \n Rated 2 out of\n 5\n by\n Jonathan from\n This was difficult to use, did not cut well. I...\n This was difficult to use, did not cut well. I had to use a drywall saw to finish the holes.\n

\n Date published: 2020-12-12

\n \n \n \n Rated 5 out of\n 5\n by\n door from\n Reasonable price and great for overhead led lighting.\n Reasonable price and great for overhead led lighting.\n

\n Date published: 2020-12-05

\n \n \n \n Rated 1 out of\n 5\n by\n HomeDepotCustomer from\n Will not cut clean in drywall...\n Will not cut clean in drywall\n

\n Date published: 2020-12-05

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2020-11-26

\n \n \n \n Rated 3 out of\n 5\n by\n Bill from\n If you buy this, take care to make sure the...\n If you buy this, take care to make sure the plastic catch basket doesn't spin and gouge a circle in the surrounding sheetrock. Better instructions detailed would be greatly appreciated. If you are only cutting 1 - 3 holes I recommend you used a regular circular hole cutter and save your time, money and the land-fill.\r\n\r\nuse newspaper to catch the majority of the dust.\n

\n Date published: 2020-11-26

\n \n \n \n Rated 5 out of\n 5\n by\n Carl from\n Works great and would 10/10 buy again...\n Works great and would 10/10 buy again\n

\n Date published: 2020-11-13

\n \n \n \n Rated 5 out of\n 5\n by\n PETER from\n easy to cut hole for recessed or pod lights...\n easy to cut hole for recessed or pod lights\n

\n Date published: 2020-11-11

\n \n \n \n Rated 1 out of\n 5\n by\n HomeDepotCustomer from\n Didn't work for me had to cut hole manually....\n Didn't work for me had to cut hole manually.\n

\n Date published: 2020-11-11

\n \n \n \n Rated 3 out of\n 5\n by\n NEAL from\n I tried a couple of different ways to tighten the...\n I tried a couple of different ways to tighten the set screw but I had a problem of the blade assembly slip and ruined my penetration.\n

\n Date published: 2020-11-10

\n \n \n \n Rated 1 out of\n 5\n by\n EMERSON from\n It get loose in the first try and when I...\n It get loose in the first try and when I was tightening it it broke\n

\n Date published: 2020-10-24

\n \n \n \n Rated 3 out of\n 5\n by\n keith from\n So, so tool. Good idea but not as easy...\n So, so tool. Good idea but not as easy to use as one would think. Tends to be a bit hard to control particularly if it hits some thing behind the drywall. I would buy it again\n

\n Date published: 2020-10-24

\n \n \n \n Rated 5 out of\n 5\n by\n ElDiablo from\n Drywall Holes in No Time\n If you need to save time and effort cutting drywall holes, use this tool. If you need to cut holes in a prison wall, lumber, or plaster lath, do not use this tool. I have used it to easily cut 12 holes for recessed lights and have not had an issue with it. Regarding durability, I'm not sure it would hold up for cutting recessed light holes all year long. That's why professionals buy the hole saws at $25+ per size. I needed four 4" and eight 6" holes, and this one $30 bit did the trick for both. (If you're only cutting drywall and can avoid rafters/joists/lath or other obstructions, I could see this bit holding up for a long time though.) Some reviewers complained about the dust shield rotating. Just make sure that when you insert the drill bit into your drill, you tighten the chuck against the bit while leaving some space for the dust shield and washer to spin freely around the bit. The bit is plenty long enough to leave a gap for the shield. Then, when you are drilling and the side cutters start to bite the drywall, the shield comes in contact with the ceiling, and the shield will stop spinning.\n

\n Date published: 2020-10-08

\n \n \n \n Rated 1 out of\n 5\n by\n Anonymous from\n Useless\n It is really useless and doesn’t work , don’t spend your money for this , buy a drywall saw and do your job,\n

\n Date published: 2020-09-13

\n \n \n \n Rated 1 out of\n 5\n by\n HomeDepotCustomer from\n Would not stay tight and the Screw came...\n Would not stay tight and the Screw came out after my first two holes.\n

\n Date published: 2020-09-10

\n \n \n \n Rated 5 out of\n 5\n by\n Robert from\n Good Tool!\r\nQuick to set and save a lot time and...\n Good Tool!\r\nQuick to set and save a lot time and the cut is clean.\n

\n Date published: 2020-09-08

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2020-09-02

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n The tool work real good until contact was made with...\n The tool work real good until contact was made with a truss. The tool then lost position and made a bigger hole then needed.\n

\n Date published: 2020-08-25

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2020-08-20

\n \n \n \n Rated 3 out of\n 5\n by\n CJ from\n Blades dull to quickly...\n Blades dull to quickly\n

\n Date published: 2020-08-14

\n \n \n \n Rated 5 out of\n 5\n by\n lineman85 from\n Im am a believer works well makes the job cleaner...\n Im am a believer works well makes the job cleaner and more professional\n

\n Date published: 2020-08-04

\n \n \n \n Rated 4 out of\n 5\n by\n Mike from\n Cut one of 6 holes so far. The other...\n Cut one of 6 holes so far. The other 5 have to wait until I hang a new ceiling. Hope to get a better feel on final penetration of the Sheetrock. The resistance of the dust cover plastic as pressure is applied to continue the drill/cut makes it a little difficult. Overall it cut a clean and precise hole. Cheaper than a dedicated diameter hole saw and works well.\n

\n Date published: 2020-08-04

\n \n \n \n Rated 5 out of\n 5\n by\n Good from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2020-07-31

\n \n \n \n Rated 5 out of\n 5\n by\n Roger from\n Worked great and very quick and easy....\n Worked great and very quick and easy.\n

\n Date published: 2020-07-30

\n \n \n \n Rated 5 out of\n 5\n by\n Bob from\n Works like a charm!...\n Works like a charm!\n

\n Date published: 2020-07-21

\n \n \n \n Rated 1 out of\n 5\n by\n Dave from\n Very cheaply made the one from Milwaukee is made a...\n Very cheaply made the one from Milwaukee is made a lot better design\n

\nDate published: 2020-07-21

\n \n