\n

\n\n\n\n\n \n\n\n \n","bvRatingsSummary":"\n\n\n\n ## \n Will this shear adapt to a Dewalt DCD771 drill or impact driver DCF885\n

\n

\n \n Will this shear adapt to a Dewalt DCD771 drill or impact driver DCF885\n

\n \n\n \n Yes best time saver tools verses your hand tools\n

\n \n Date published: 2020-10-24

\n \n ## \n will this work on RYOBI drill?\n

\n

\n \n will this work on RYOBI drill?\n

\n \n\n \n Dear Fred,, ignore the rude answer from prev person,, I too have the Ryobi tools,, and yes the listing does state it works on all cordless drills,, but read the reviews about Ryobi,, it does not fit well, it has to do with where it connects on the battery, very sloppy and loose,, you can use it , but may need to modify,, be careful with it though,, look at other options where the shears attach to the rear of the drill, rather than the battery,, sometimes its not worth asking a question when you get a rude clueless answer from an internet TG,, hope this helps\n

\n \n Date published: 2021-05-16

\n \n ## \n Will this attachment fit and work with Ridgid Octane impact driver?\n

\n

\n \n \n

\n \n\n \n We have not tested the DEWALT DWASHRIR with the Ridgid Brand.\n

\n \n Date published: 2021-05-09

\n \n ## \n 18-Gauge Impact Ready Shears Accessory My question is will this tool fit my dewalt 20 volt max th...\n

\n

\n \n 18-Gauge Impact Ready Shears Accessory
My question is will this tool fit my dewalt 20 volt max that has a 1/2 inch shank?\n

\n \n\n \n Yes it fits perfect that's what I have it on works great.\n

\n \n Date published: 2020-05-11

\n \n ## \n Will it work on 18v dewalt\n

\n

\n \n \n

\n \n\n \n Don't know for sure because the tool arms might not be the same length as 20v drill\n

\n \n Date published: 2020-09-29

\n \n ## \n Will this attatchment work on another brand of drill , ex.) milwaukee?\n

\n

\n \n \n

\n \n\n \n yes\n

\n \n Date published: 2021-03-12

\n \n ## \n Will this work with the 18-Volt ONE+ Lithium-Ion Cordless 1/4 in. Hex Impact Driver?\n

\n

\n \n Will this work with the 18-Volt ONE+ Lithium-Ion Cordless 1/4 in. Hex Impact Driver?\n

\n \n\n \n Yes I’ve been using the shears with a Ryobi 18v brushless 1/4 in impact driver.\n

\n \n Date published: 2020-07-09

\n \n ## \n Will these shears work to cut Hardie Fiber cement planks?\n

\n

\n\n Will these shears work to cut Hardie Fiber cement planks?\n

\n \n\n \n I’m sure it will work and in a pinch I would but keep in mind it’s going to dull the blades quickly and most likely be done and need sharping after the one job\n

\n \n Date published: 2020-03-31

\n \n 18-Gauge Impact Ready Shears Accessory is rated\n out of\n 5 by\n 151.\n

\n\n\n\n\n\n\n \n\n \n","bvReviews":"\n\n\n\n\n\n

\n\n\n\n\n\n\n\n \n\n \n"}\n \n Rated 1 out of\n 5\n by\n MIKE from\n I bought the shears and a new 20v impact and...\n I bought the shears and a new 20v impact and drill kit together for a job. Of course the drill and impact worked flawlessly but the stabilizer on the shears wont even attach to the drill or impact driver. They are very sharp and so cut well if you can manage to stabilize somehow. Overall I should have bought the malco brand.\n

\n Date published: 2022-01-12

\n \n \n \n Rated 5 out of\n 5\n by\n Pat50 from\n Works great! Wouldn't want to get my finger in it....\n Works great! Wouldn't want to get my finger in it. Lol!\n

\n Date published: 2022-01-06

\n \n \n \n Rated 5 out of\n 5\n by\n Drew925 from\n Game Changer\n Bought this shear attachment for cutting aluminum and wire mesh. What used to be a frustrating and time consuming task takes only seconds! I don't know why I waited this long to buy this!\n

\n Date published: 2021-12-29

\n \n \n \n Rated 4 out of\n 5\n by\n RONALD from\n It works very good works very good been using it...\n It works very good works very good been using it daily\n

\n Date published: 2021-12-25

\n \n \n \n Rated 4 out of\n 5\n by\n PATRICIA from\n Only problem is the set screw doesn’t stop it from...\n Only problem is the set screw doesn’t stop it from rotating when your cutting. Cuts beautifully though!\n

\n Date published: 2021-12-23

\n \n \n \n Rated 1 out of\n 5\n by\n DAVID from\n Candidly, it simply didn’t work!!...\n Candidly, it simply didn’t work!!\n

\n Date published: 2021-10-06

\n \n \n \n Rated 5 out of\n 5\n by\n Will 23707 from\n Not just for sheet metal\n I use this tool for sheet metal, metal studs, and FRP. Saves me a ton of time and simple to use. Also it can be adjusted for hard to reach angles.\n

\n Date published: 2021-09-04

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2021-07-29

\n \n \n \n Rated 5 out of\n 5\n by\n WILL from\n Received my Oder quickly and product works very well. Very...\n Received my Oder quickly and product works very well. Very pleased.\n

\n Date published: 2021-06-27

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2021-06-25

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2021-06-10

\n \n \n \n Rated 3 out of\n 5\n by\n Buddy from\n Not as good as I was hoping....\n Not as good as I was hoping.\n

\n Date published: 2021-06-03

\n \n \n \n Rated 4 out of\n 5\n by\n HomeDepotCustomer from\n It functions very well, smooth running and cutting. The rear...\n It functions very well, smooth running and cutting. The rear attach piece really throws it off though. It kept coming off and there's was no way to get it secure enough so it would stay properly.\n

\n Date published: 2021-05-20

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2021-04-22

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2021-04-10

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2021-04-01

\n \n \n \n Rated 5 out of\n 5\n by\n RaiganErazo from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2021-03-20

\n \n \n \n Rated 5 out of\n 5\n by\n TODD from\n Alot quicker than regular cutters.\r\nSaves time.and time is money.\r\nAnd does...\n Alot quicker than regular cutters.\r\nSaves time.and time is money.\r\nAnd does a more professional job.\r\nLove it.\n

\n Date published: 2021-03-18

\n \n \n \n Rated 3 out of\n 5\n by\n Dbd44 from\n Shears work good but my impact always gets hung up...\n Shears work good but my impact always gets hung up on the metal sheet before I get through the entire cut. I should have invested in an actual set of Milwaukee shears.\n

\n Date published: 2021-03-06

\n \n \n \n Rated 5 out of\n 5\n by\n MATT from\n Best way to cut out the side of a furnace...\n Best way to cut out the side of a furnace\n

\n Date published: 2021-03-06

\n \n \n \n Rated 1 out of\n 5\n by\n Ccsd806 from\n Very disappointed in this item from Dewalt. Made a 4...\n Very disappointed in this item from Dewalt. Made a 4 inch cut and item broke. The shears are great, but the screw that holds the shears straight will not tighten, allowing the shears to turn while try to cut. Will be returning to Home Depot.\n

\n Date published: 2021-02-18

\n \n \n \n Rated 1 out of\n 5\n by\n LUIS from\n Very low material quality and not effective...\n Very low material quality and not effective\n

\n Date published: 2021-02-18

\n \n \n \n Rated 5 out of\n 5\n by\n Ali a from\n Tool\n Very practical tool, easy to use, cheap for the price\n

\n Date published: 2021-02-11

\n \n \n \n Rated 3 out of\n 5\n by\n HomeDepotCustomer from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2021-01-29

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n It is very efficient and easy to use...\n It is very efficient and easy to use\n

\n Date published: 2021-01-29

\n \n \n \n Rated 5 out of\n 5\n by\n Ronski from\n Can't find anything wrong with it. Ripped about 300 lineal feet of siding so far. It does wrinkle...\n Can't find anything wrong with it. Ripped about 300 lineal feet of siding so far. It does wrinkle up the cut-off side pretty good but that's okay for what I'm doing. Absolutely great for the price.\n

\n Date published: 2021-01-29

\n \n \n \n Rated 4 out of\n 5\n by\n HomeDepotCustomer from\n Love the tool!\nMy only issue was it doesn’t attach to...\n Love the tool!\nMy only issue was it doesn’t attach to the drill correctly, but it does work great anyway\n

\n Date published: 2021-01-15

\n \n \n \n Rated 1 out of\n 5\n by\n HomeDepotCustomer from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2021-01-15

\n \n \n \n Rated 5 out of\n 5\n by\n Secretary31 from\n Was Christmas gift for Husband, it was something he had...\n Was Christmas gift for Husband, it was something he had needed at times, but never bothered to purchase one. He was very pleased.\n

\n Date published: 2021-01-14

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\nDate published: 2020-12-28

\n \n