\n 7-1/4 inch Cermet Blade for Cutting Ferrous Metals and Stainless Steel is rated\n out of\n 5 by\n 122.\n

\n\n\n\n\n\n\n \n\n \n","bvReviews":"\n\n\n\n\n\n

\n\n\n\n\n\n\n\n \n\n \n"}\n \n Rated 5 out of\n 5\n by\n Dcwelds from\n Awesome blade for circular saw, chop saw, or even table saw. Whatever saw u got to cut any metal(...\n Awesome blade for circular saw, chop saw, or even table saw. Whatever saw u got to cut any metal(other than aluminum, they have their own blades, more tpi) worked great on stainless, steel, and other ferrous metal on my circularsaw. Lasted quite a long time too, at least double the cuts that the regular Diablo steel demon handles. Used it maybe twice a week and it lasted around 5 months while cutting thick stainless steel! Well worth the money.\n

\n Date published: 2020-09-08

\n \n \n \n Rated 5 out of\n 5\n by\n Blade from\n I was cutting pretty thin tin roofing but I cut...\n I was cutting pretty thin tin roofing but I cut all five pieces at one time with this blade worked well\n

\n Date published: 2020-08-23

\n \n \n \n Rated 5 out of\n 5\n by\n Maynard from\n It cut through 1/4 wall tubing very well!...\n It cut through 1/4 wall tubing very well!\n

\n Date published: 2020-08-18

\n \n \n \n Rated 5 out of\n 5\n by\n Russ from\n This is a great blade, I used it to cut...\n This is a great blade, I used it to cut metal roofing and metal siding for a steel building. I was afraid that because the metal was so thin it might cause some kickback and bend the sheeting but it didn’t at all. Wear a long sleeve shirt when using it though the metal chips can be pretty hot.\n

\n Date published: 2020-08-18

\n \n \n \n Rated 5 out of\n 5\n by\n Nice from\n Used blade on circular saw to trim 44 metal balusters for stairs. Went right through with no prob...\n Used blade on circular saw to trim 44 metal balusters for stairs. Went right through with no problems and was very durable. Wasn’t dull afterwards\n

\n Date published: 2020-08-18

\n \n \n \n Rated 5 out of\n 5\n by\n Kyle from\n Fantastic\n Used this blade in my miter saw to cut 1/4" thick steel angle. Cuts fast and clean.\n

\n Date published: 2020-08-17

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2020-08-15

\n \n \n \n Rated 1 out of\n 5\n by\n FarmallSa from\n Was cutting 3/16 x 4 chanel, blade only...\n Was cutting 3/16 x 4 chanel, blade only made 2 cuts and would not make the 3rd cut.\n

\n Date published: 2020-08-14

\n \n \n \n Rated 5 out of\n 5\n by\n Steve from\n Blade is excellent, used it for cutting expanded metal....\n Blade is excellent, used it for cutting expanded metal.\n

\n Date published: 2020-08-14

\n \n \n \n Rated 5 out of\n 5\n by\n Gary from\n Worked great at cutting metal with ease.\n Worked great at cutting metal with ease.\n

\n Date published: 2020-08-14

\n \n \n \n Rated 5 out of\n 5\n by\n Gerry from\n Effective for metal roofing\n Worked as expected. Cut metal roofing like butter!\n

\n Date published: 2020-08-14

\n \n \n \n Rated 5 out of\n 5\n by\n TJinBC from\n Great for cutting corrugated tin roofing\n At first I was cutting out sections of corrugated tin roofing for a project using a 4 1/2" grinder, got frustrated and ordered the "steel demon" blade for my skilsaw. Waited till it arrived, continued with the project, and I was impressed: This blade cut through the tin like butter; the cuts were clean, fast and effortless compared to the grinder cuts. Because of the toothed (?) design, the tin had to be supported to prevent rattling. Have not tried it on thicker metals, but for cutting corrugated steel roofing, this blade gets 5 stars all day long.\n

\n Date published: 2020-08-04

\n \n \n \n Rated 5 out of\n 5\n by\n RobT from\n Did the job....\n Did the job.\n

\n Date published: 2020-07-31

\n \n \n \n Rated 5 out of\n 5\n by\n Jm from\n Nice Blade.\nCuts metal very well.\nCaution, spits out lots of very...\n Nice Blade.\nCuts metal very well.\nCaution, spits out lots of very hot shavings!!!\n

\n Date published: 2020-07-30

\n \n \n \n Rated 5 out of\n 5\n by\n summitJJ from\n Cuts metal like it is wood. Amazing really. ...\n Cuts metal like it is wood. Amazing really. But wear a face shield!\n

\n Date published: 2020-07-30

\n \n \n \n Rated 5 out of\n 5\n by\n GoodRootsCafe from\n I used the metal blade to shorten the legs of...\n I used the metal blade to shorten the legs of 3 stainless steel tables for my food truck. It cut through them like butter!\n

\n Date published: 2020-07-21

\n \n \n \n Rated 5 out of\n 5\n by\n ronwiltx from\n I had tried to cut some square conduit with a...\n I had tried to cut some square conduit with a hacksaw (new blade) and it barely dented the conduit after a couple of minutes. The Diablo blade cut through it like butter...with very few sparks and smooth edges that did not burn my hand. Great job!!! Thanks\n

\n Date published: 2020-07-21

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2020-07-15

\n \n \n \n Rated 5 out of\n 5\n by\n DAGO from\n Cuts wood like cutting butter. I am very satisfied....\n Cuts wood like cutting butter. I am very satisfied.\n

\n Date published: 2020-07-14

\n \n \n \n Rated 5 out of\n 5\n by\n John from\n We are using Diablo Steel Demon on aluminum railing and...\n We are using Diablo Steel Demon on aluminum railing and cuts like butter.\n

\n Date published: 2020-07-14

\n \n \n \n Rated 1 out of\n 5\n by\n HomeDepotCustomer from\n The blade was advertised as not getting the materials hot...\n The blade was advertised as not getting the materials hot while cutting and it definitely did not perform, it does cut well and fairly clean .\n

\n Date published: 2020-07-08

\n \n \n \n Rated 5 out of\n 5\n by\n MRC from\n I was able to cut steel plates for renovation project...\n I was able to cut steel plates for renovation project and price is reasonable.\n

\n Date published: 2020-07-01

\n \n \n \n Rated 4 out of\n 5\n by\n 67blue from\n This blade works great . Why buy a metal saw...\n This blade works great . Why buy a metal saw when this blade is a killer?\n

\n Date published: 2020-06-24

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n I cut 1 1/5 square steel tube and looked at...\n I cut 1 1/5 square steel tube and looked at the teeth they looked like they were not used\n

\n Date published: 2020-06-23

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n It's perfect....\n It's perfect.\n

\n Date published: 2020-06-23

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n Only way to cut metal!!!...\n Only way to cut metal!!!\n

\n Date published: 2020-06-16

\n \n \n \n Rated 5 out of\n 5\n by\n Iscom from\n Make me easy to do my work Thanks\n Make me easy to do my work Thanks\n

\n Date published: 2020-06-16

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2020-06-10

\n \n \n \n Rated 5 out of\n 5\n by\n JJ from\n Great product...\n Great product\n

\n Date published: 2020-06-09

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\nDate published: 2020-06-03

\n \n