\n Easy Fit Coupling is rated\n out of\n 5 by\n 67.\n

\n\n\n\n\n\n\n \n\n \n","bvReviews":"\n\n\n\n\n\n

\n\n\n\n\n\n\n\n \n\n \n"}\n \n Rated 1 out of\n 5\n by\n Scotty2112 from\n Horrible, every connection leaked\n I used several of these, even in areas where I could apply a lot of force - and every connection leaked. I will have to cut every one off and replace. Going to try another store, different brand, how anyone says these are easy is beyond me.\n

\n Date published: 2020-07-05

\n \n \n \n Rated 5 out of\n 5\n by\n sillyalleyguy from\n Here’s the trick!\n Soak the coupling — not the hose — in hot water for 30 seconds. Then the hose ends slip in without mich force at all. Genius! Soaking the hose ends in hot water didnt do the trick.\n

\n Date published: 2020-06-29

\n \n \n \n Rated 1 out of\n 5\n by\n Zoman from\n Didn't fit my irritation tubing. My fault.\n Didn't fit my irritation tubing. My fault.\n

\n Date published: 2020-06-25

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2020-06-17

\n \n \n \n Rated 1 out of\n 5\n by\n RRuberg from\n Forget it!!\n Read all the rest of these reviews that verify this product simply doesn't work! Save yourself the frustration and go to Ace Hardware and buy PowerLoc Couplings....a little more expensive but they work beautifully!!\n

\n Date published: 2020-06-08

\n \n \n \n Rated 1 out of\n 5\n by\n HomeDepotCustomer from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2020-06-04

\n \n \n \n Rated 5 out of\n 5\n by\n Denden from\n Works great one time. Can not be reused\n Works great one time. Can not be reused\n

\n Date published: 2020-05-24

\n \n \n \n Rated 5 out of\n 5\n by\n Jeremy from\n no problem\n I don't know what peoples problems are these are great, maybe using wrong tubing, no problem with rain bird 1/2 which is around 0.68 OD.\n\nalso..you are supposed to have a pressure regulator if you are having problems with leaks.\n\nfinally always wet the tubing before pushing it on while twisting... only take moderate strength.\n

\n Date published: 2020-05-24

\n \n \n \n Rated 4 out of\n 5\n by\n PDW from\n The fitting worked, but it was not easy to push together, even after soakin...\n The fitting worked, but it was not easy to push together, even after soaking in hot water.\n

\n Date published: 2020-05-20

\n \n \n \n Rated 1 out of\n 5\n by\n HLR from\n Very poor product\n Seems as though the best you can hope for is to get one end into the coupler. If you get one end in, it won't come out if the other end fails to connect. So, you end up cutting off the coupled end, which serves to shorten your drip line. Pushed and twisted as hard as I could and the second end would not connect. Very poor product, indeed.\n

\n Date published: 2020-05-09

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n Rating provided by a verified purchaser...\n Rating provided by a verified purchaser\n

\n Date published: 2020-05-06

\n \n \n \n Rated 4 out of\n 5\n by\n HomeDepotCustomer from\n This was the perfect solution to solve the huge leak...\n This was the perfect solution to solve the huge leak (hole) that sprang up. We cut out the area with the hole and installed this coupling and problem solved. It fit fine and was done quickly and easily. Hardest part was cutting the drip line.\n

\n Date published: 2020-05-02

\n \n \n \n Rated 5 out of\n 5\n by\n SamM from\n Worked well with brown drip kine\n I was worried about buying this product after reading all the negative reviews but there weren’t many options given the hurry that I was in. I was pleasantly surprised how well it worked. It took moderate effort to push it on the brown drip line but there were no leaks.\n

\n Date published: 2020-04-11

\n \n \n \n Rated 1 out of\n 5\n by\n Msquared from\n Horrible.\n It is almost impossible to insert the poly pipe into these fittings. Do not buy them! Even the stiffer heavy wall pipe crushes before you can get it to penetrate the fitting compression ring. Read the other reviews and believe them.\n

\n Date published: 2020-03-26

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n This item made it simple to repair my broken drip...\n This item made it simple to repair my broken drip line.\n

\n Date published: 2020-02-11

\n \n \n \n Rated 5 out of\n 5\n by\n SJ from\n I've used several of these on 1/2" drip line without any problem. Why others have such problems ...\n I've used several of these on 1/2" drip line without any problem. Why others have such problems is a mystery to me. Just push a twist a little.\n

\n Date published: 2019-11-09

\n \n \n \n Rated 1 out of\n 5\n by\n Mike from\n Poor product, do not buy....\n I bought these before reading reviews, and like others, I had problems installing them. I found that expanding the inside diameter with a conical device and adding a lubricant allowed me to connect the tubes...and then both sides leaked no matter how much insertion force I applied. Junk product.\n

\n Date published: 2019-09-16

\n \n \n \n Rated 1 out of\n 5\n by\n NoNeckNick from\n Just like everyone is stating, this is the worst coupling I have ever used, however, it's the onl...\n Just like everyone is stating, this is the worst coupling I have ever used, however, it's the only one that Home Depot carries and I needed something right away. After pulling every muscle in my forearms, I think I got it installed. Time will tell, hope it doesn't leak. JUNK, DO NOT BUY!\n

\n Date published: 2019-09-11

\n \n \n \n Rated 1 out of\n 5\n by\n Marmo from\n Trash\n This is trash. Leaks if you can t push it with massive force. Used 3 and everyone leaked on one side. Even using the rain bird poly. Don't spend money on this and just use the compression versions. If u have time use the inline barb connected with hose rings. Cost more and takes longer but works everytime.\n

\n Date published: 2019-08-11

\n \n \n \n Rated 5 out of\n 5\n by\n joe from\n i am pretty surprised at all the negative reviews. i did have a hard time getting it on the firs...\n i am pretty surprised at all the negative reviews. i did have a hard time getting it on the first time, i thought it was on all the way and when i turned it back on it was leaking. a little more muscle and they work no problem\n

\n Date published: 2019-06-28

\n \n \n \n Rated 1 out of\n 5\n by\n Bones from\n Just like everyone else cannot get these couplings to fit. To make matters worse there is no remo...\n Just like everyone else cannot get these couplings to fit. To make matters worse there is no removal tool so it by accident you get one to stay on you can't get it off if you have to return it. I have 30 or so couplers and was only able to get one installed successfully. I am returning the other 29.\n

\n Date published: 2019-03-30

\n \n \n \n Rated 1 out of\n 5\n by\n Clare from\n Like many others, I wasted a lot of time trying to get the tubing to stay in the coupling. Once ...\n Like many others, I wasted a lot of time trying to get the tubing to stay in the coupling. Once I came in the house and looked it up on line, I was able to get it to work by using warm water to soften the tubing. They should print that tip on on the coupling sticker if they are going to continue to sell this product.\n

\n Date published: 2018-10-07

\n \n \n \n Rated 1 out of\n 5\n by\n JCF from\n I'm chiming in with all the others to say that this product does not work. It leaks. Its unclea...\n I'm chiming in with all the others to say that this product does not work. It leaks. Its unclear why this coupler has two separate floating inner pipe sections instead of 1 continuous part. If it was a continuous part, there would be no reason to leak. Had to return the parts to Home Depot and go to a different hardware store to get the kind that works.\n

\n Date published: 2018-07-30

\n \n \n \n Rated 1 out of\n 5\n by\n Kevin from\n I was feeling good about this part when, unlike others, it was easy to install. However, when I ...\n I was feeling good about this part when, unlike others, it was easy to install. However, when I tested it, it was impossible to prevent from leaking. I cut it off, went to hardware store, and bought the simple old-fashioned connector that works.\n

\n Date published: 2018-07-03

\n \n \n \n Rated 1 out of\n 5\n by\n Jess from\n I may have dislodged some internal organs trying to use this coupling. Will never buy again.\n I may have dislodged some internal organs trying to use this coupling. Will never buy again.\n

\n Date published: 2018-06-22

\n \n \n \n Rated 1 out of\n 5\n by\n Ric from\n Like everyone else, these things just don't work. You need to be Superman. Rainbird should reim...\n Like everyone else, these things just don't work. You need to be Superman. Rainbird should reimburse me for my time. I will not buy another Rainbird product, and Home Depot is getting a black eye for selling me this junk.\n

\n Date published: 2018-06-12

\n \n \n \n Rated 1 out of\n 5\n by\n Mike from\n This item is terrible. For being advertised as easy-fit, it sure isn't. I tried and tried to ge...\n This item is terrible. For being advertised as easy-fit, it sure isn't. I tried and tried to get it to connect, and it will not. I tried pushing, twisting, and forcing it and finally just gave up. I even tried to connect it to a 12'' piece of replacement hose that I got at HD and it would not connect to it either. I am just going to return them and get a different brand\n

\n Date published: 2018-05-25

\n \n \n \n Rated 5 out of\n 5\n by\n HomeDepotCustomer from\n Easy assembly and adherence....\n Easy assembly and adherence.\n

\n Date published: 2018-05-24

\n \n \n \n Rated 1 out of\n 5\n by\n PK from\n I agree with all 1 star reviews. This product should be off the shelf. It is extremely difficult ...\n I agree with all 1 star reviews. This product should be off the shelf. It is extremely difficult to install; If you are successful then it leaks.\n

\n Date published: 2018-05-19

\n \n \n \n Rated 1 out of\n 5\n by\n stockman from\n This product should not be on market. We need Arnold Schwarzenagger to fit this.\n This product should not be on market. We need Arnold Schwarzenagger to fit this.\n

\nDate published: 2018-05-14

\n \n