Due to extremely high order volumes some store pick-up orders may be delayed. Please wait for your “ready for pick-up” email before proceeding to store.  Learn More

BE Power Equipment 2700 PSI 2.3 GPM Gas Pressure Washer

Model # BE276RA|Store SKU # 1000818701

Overview

Model # BE276RA Store SKU # 1000818701

This pressure washer is ideal for cleaning driveways, building exteriors, animal pens, parking lots, and paint preparation. It comes with four quick-connect nozzles allowing you to choose the correct angle for your intended cleaning application. It also has a chemical injector to allow you to clean with soap. Clean up to 200 square feet, in fifteen minutes, with this cold water pressure washer. This unit is powered by a PowerEase 6HP gas engine and a light-industrial AR pump, and includes a 25 ft. high pressure hose and spray gun.

  1. 2700 PSI maximum pressure, 2.3 GPM maximum flow.
  1. Clean up to 200 square feet in 15 minutes
  1. Powered by a light-industrial PowerEase 6HP engine.
  1. Light-industrial axial pump is a 2.3 GPM pump for maximum cleaning.
  1. Quick connect spray nozzles comes in 40° , and soaper for use with a range of projects and cleaning solutions.
  1. Includes a 25 foot high pressure hose with quick connect fittings. Comes with a industrial-grade high pressure spray gun and fixed chemical injector.

Specifications

Dimensions

Assembled Depth (in inches)
20
Assembled Height (in inches)
22
Assembled Weight (in lbs)
80
Assembled Width (in inches)
20
Packaged Depth (in inches)
23
Packaged Height (in inches)
23
Packaged Weight (In lbs)
80
Packaged Width (in inches)
21

Details

Country of Origin
CN-China
Engine Make
PowerEase 6HP engine.
Hose Length (ft.)
25
Litres per Minute (LPM)
8.706
Maximum Pressure (PSI)
2700
Number of Batteries Included
0
Power Type
Gas
Pump Type
Axial
Usage
Heavy Duty
Use
Residential

Warranty / Certifications

This product comes with a 1-year warranty for normal use when not commercially used on pump, 2 year on engine and 90 days on everything else. Call 1-866-850-6662 for full warranty details.
2700 PSI 2.3 GPM Gas Pressure WasherBE Power Equipment 2700 PSI 2.3 GPM Gas Pressure WasherThis pressure washer is ideal for cleaning driveways, building exteriors, animal pens, parking lots, and paint preparation. It comes with four quick-connect nozzles allowing you to choose the correct angle for your intended cleaning application. It also has a chemical injector to allow you to clean with soap. Clean up to 200 square feet, in fifteen minutes, with this cold water pressure washer. This unit is powered by a PowerEase 6HP gas engine and a light-industrial AR pump, and includes a 25 ft. high pressure hose and spray gun.
BE Power Equipment
1000818701
CAD318
The Home Depot Canada
2700 PSI 2.3 GPM Gas Pressure Washer is rated 4.2 out of 5 by 117.
  • y_2021, m_4, d_15, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.14
  • cp_1, bvpage1
  • co_hasreviews, tv_60, tr_57
  • loc_en_CA, sid_1000818701, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 63ms
  • REVIEWS, PRODUCT
Rated 4 out of 5 by from Hose Connector Cracked I bought this BE brand based on BC client service responding to customers having issues . The quick and direct response is what I hope to see now. Love this pressure washer, I did notice a crack on the connector for the hose. Pictures are supplied. It will fail soon , only approx one month old. I am confident for a response from BE and am NOT worried at all. I sent them a email and thought to share this with Home Depot comments to show how much client support works. I will keep this updated. Vancouver Island . Thank You. Nick
Date published: 2021-03-31
Rated 4 out of 5 by from A good value I bought this unit about one year ago. It is a good purchase and would recommend it for the average home owner. A borrowed electrical one would not cut the mustard on driveways. And when i say mustard i really mean algae, dirt and slime. That being said, this one is overkill for many home applications. Washing your car with this! HA. Waste of time and don't bother getting the shampoo kit. And its not necessary for home siding or vinyl decking if thats your goal as its powerful. But ideal for tough driveways, stripping the stain off a cedar/wood deck on an annual basis. PROS Powerful enough for driveways, paint stripping and asphalt Doesnt need a 1/2 hour breather like most electrical ones. NEGS Noisy as heck. Wear earplugs. Eats a tonne of gas for a small engine. Very poor labels for choke gas etc. Arrows pointing both ways. Why bother? As mentioned by others, the bolts on the bottom side are loose. Two on mine fell off during use. Very poor lock washers. Spend the 5 cents for real lock washers. And, shakes like a pole dancer. Hence the above bolt loosening. Im happy I went gas but electrical might be enough for you. And im happy I didnt purchase the $800+ ones. This one is fine for <20 hours a year.
Date published: 2021-03-04
Rated 4 out of 5 by from Good value It has a little trouble starting when cold. Other than that it works great.
Date published: 2020-11-25
Rated 5 out of 5 by from Bonne laveuse a pression Tres bonne pompe puissante, si vous faite attention a l'échappement tous sera ok
Date published: 2020-11-17
Rated 4 out of 5 by from Great Value with Nice Design Very good design. The engine seems like a Honda knock off. The quality of the gun seems good but the hose is garbage. Hard plastic thats terrible to use. Look to replace it as soon as you buy the machine. Overall great value. If the hose was better I would of given it 5 stars
Date published: 2020-10-28
Rated 1 out of 5 by from Avoid. I don't even know where to begin with this. I purchased this this past summer and it ran for about an hour of usage time before giving me tons of issues. After that hour, it would not start. After a ton of time checking all the fundamentals (oil level, spark, etc....I even changed the oil and wasted a litre) I found out the unit's oil level sensor switch was defective. It would start so long as that was unplugged, which is not ideal since it's meant to protect your engine. One day when using it I started hearing a loud rattle coming from the unit. I walked over to find out two of the four ENGINE MOUNTING BOLTS HAD BACKED OFF! To me this is a big safety concern and when I called BE about it, the rep told me "someone probably had a bad day and didn't tighten them". Well, they were tight to begin with but the operation of the unit had caused them to back off. To me that is a poor excuse of what is likely poor fastener selection. Just because you use a lock nut doesn't mean it will work. Preventing the looseing of fasteners can be a complicated engineering task. The rep basically denied the issue and said "only 10 out of 1000 people have complained about this" as if he sent out some sort of survey and that number means anything. It shouldn't happen to anyone. Also, if you use this unit on concrete or another smooth surface, it vibrates so much that it'll basically keep moving in circles. This may be attributed to the lack of isolation between the engine and the frame and it's overal design/shape. Again, a feature of poor design. Lastly, the description says it comes with an AR pump. It does not but comes with a generic. When I asked BE about the issues I experienced, the technical rep accused me of being a competitor. I understand this unit is priced low to begin with so i'm not saying it should be perfect. But for what it's worth, you should at least feel safe using it. I didn't, so I returned it after being tired of the headaches. I purchased something slightly more expensive with basically the same engine and every single fastener was well thought of and the engine is nicely isolated from the frame. It doesn't dance around on me and none of the fasteners have come loose.
Date published: 2020-10-08
Rated 5 out of 5 by from Happy Washer Very happy with the way it works. Has the different pressure nozzles so that’s another plus.
Date published: 2020-10-07
Rated 5 out of 5 by from Good products Good product, easy to start and powerful. Recommended to buy.
Date published: 2020-09-13
  • y_2021, m_4, d_15, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.14
  • cp_1, bvpage1
  • co_hasreviews, tv_60, tr_57
  • loc_en_CA, sid_1000818701, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 29ms
  • REVIEWS, PRODUCT

Can I update my review . The response from BE support is 5 star. Just wanted to add Geoff from client support was great and sent a replacement hose right away. Great service . Thank You

Asked by: Maddog
Agree BE support is great.
Answered by: Tadius
Date published: 2021-04-09

Is the pressure adjustable? Is there a pressure gauge on the system?

Asked by: cvieira
No there is no gauge. You could probably adjust the pressure with the unloader valve but would have no way of knowing what it was. The wider the tip you use the less force what ever you are washing gets hit with though
Answered by: Ry whiskey
Date published: 2021-02-07

Is this pressure washer ok to wash car and trucks ?

Asked by: jeevan
Yes as you can change the nozzle on them. I used it on my car.
Answered by: Lil K
Date published: 2020-06-10

What part of this machine comes from Canada? Every sticker on it says made in China.

Asked by: Frankfuurd
Hi there Frank this unit is made in China, thank you very much.
Answered by: BE POWER EQUIPMENT
Date published: 2020-08-19

Can you send me a picture of which outlet to connect to for soap dispenser

Asked by: Big Al
Sorry for the delay. My washer was at my cottage. There is a small fitting above where the water hose is connected. A clear tube is attached to it. No option for attaching a picture.&nbsp;
Answered by: Paulm
Date published: 2020-06-10

Is this gas powered or Electric.

Asked by: Crash Factor
Gas
Answered by: Gray
Date published: 2020-05-12

Is a spray gun coming with it?

Asked by: Newbie
Yes a wand is included.
Answered by: WEHh
Date published: 2020-05-08

I know the max psi is 2700 but what is the operating pressure? Also for the water intake, does it have to be a garden hose connected to a water line or are you able to submerge the hose into a bucket of water and use that as a source?

Asked by: Nicholas
The operating pressure is typically within 10% of the rated pressure depending on friction losses and such, and you will need to hook up the inlet to a garden hose from a city fed tap for axial pump pressure washers, it will not draw water from a bucket. Typically some of the more expensive triplex pumps with be able to do that if need be, please contact BE Power Equipment at 1-866-850-6662 for more details.
Answered by: The Home Depot Canada
Date published: 2020-05-12
  • y_2021, m_4, d_15, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.14
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_14
  • loc_en_CA, sid_1000818701, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 74ms
  • QUESTIONS, PRODUCT