Big O 4 inch X 10 foot Solid Tubing

Model # 438593|Store SKU # 1000414896

Overview

Model # 438593 Store SKU # 1000414896

Single-wall corrugated HDPE drainage tubing is ideal for agricultural and residential applications

Wide range of fittings and joining systems

Highly resistant to chemical and corrosion attack, not affected by freeze/thaw cycles

Low initial cost, significant installation savings

Product Of Canada

Manual

The Home Depot will provide an accessible format of PDFs upon request. Please contact us at
1-800-628-0525.

Specifications

Dimensions

Assembled Depth (in inches): 120.0
Assembled Height (in inches): 4.5
Assembled Weight (in lbs): 3.0
Assembled Width (in inches): 4.5
Packaged Depth (in inches): 120
Packaged Height (in inches): 4.5
Packaged Weight (In lbs): 3
Packaged Width (in inches): 4.5

Warranty / Certifications

Big O products are guaranteed against defects resulting from faulty workmanship or materials. If any product is found to be defective for these reasons, upon written notice and return of the product, the defective product will be replaced by Armtec free of charge, including shipping charges for the replacement product. Please call 1-800-265-7622 for complete warranty details.

Related Products

Watts RBVTP Tubing 1 3/4 Inch OD X 1 1/4 ID

Polyvinyl chloride reinforced with polyester braiding has four times the working pressure of single wall PVC tubing. The smooth, dense bore maximized flow and reduces sediment buildup.

View Details

CANADA TUBING Black Vinyl Tubing, 3/4 Inch Inside Diameter X 1 Inch Outside Diameter X 10 Ft Coil

Black Vinyl Tubing, commonly used for above or below ground applications. Made in Canada. Phthalate free, and not for use on icemakers. Tubing can withstand 35 PSI at 70 degrees fahrenheit (21 degrees C.)

View Details

CANADA TUBING Micro Fuel Line, 1/8 Inch Inside Diameter X 1/4 Inch Outside Diameter X 10 Ft Coil

Micro Fuel Line, commonly used for transfer of Petroleum products. Polyurethane micro fuel line; orange hose, and made in North America.

View Details

CANADA TUBING Polythylene Tubing, 3/16 Inch Inside Diameter X 5/16 Inch Outside Diameter X 10 Ft Coil

Polyethylene tubing is economical and lightweight. Made in Canada. Typical applications: water lines, water softener lines, vending equipment, pneumatic logic control lines, transfer of air and liquids in industrial applications. NOTE: Working pressure decreases as temperature increases. Pressure ratings can only be obtained with proper coupling applications.

View Details