Maintaining clean, safe stores is one of our top priorities.  Learn More

Bur-Cam 3/4Hp Fluomac Sw Jet Pump Tankless

Model # 506532SS|Store SKU # 1000481016

Overview

Model # 506532SS Store SKU # 1000481016

MOUNTED WITH A PRESSURE REGULATOR Inch FLUOMAC Inch #600600, THIS ELECTRONIC SYSTEM ELIMINATES THE CONVENTIONNAL TANK AND PRESSURE SWITCH TO START AND STOP THE PUMP. IT REGULATES AND CONTROLS THE DELIVERY OF WATER.

  1. IT MAKES THE PUMP SYSTEM EASILY PORTABLE, COMPACT, EASY TO USE AND STORE IN WINTER TIME.
  1. PROTECTS THE PUMP FROM RUNNING DRY IN CASE OF LOW WATER LEVEL IN WELL.
  1. CAPACITY AT 20 PSI: 900 GPH/5' 750 GPH/10' 640 GPH/15' 560 GPH/20' 475 GPH/25'.

Specifications

Dimensions

Assembled Depth (in inches)
10
Assembled Height (in inches)
18.25
Assembled Weight (in lbs)
24
Assembled Width (in inches)
16.50
Packaged Depth (in inches)
17
Packaged Height (in inches)
19
Packaged Weight (In lbs)
21.7
Packaged Width (in inches)
10

Details

Certified
Yes
Country of Origin
CA-Canada
Facilities Maintenance
No

Warranty / Certifications

2Y WARRANTY www.burcam.com
3/4Hp Fluomac Sw Jet Pump TanklessBur-Cam 3/4Hp Fluomac Sw Jet Pump TanklessMOUNTED WITH A PRESSURE REGULATOR Inch FLUOMAC Inch #600600, THIS ELECTRONIC SYSTEM ELIMINATES THE CONVENTIONNAL TANK AND PRESSURE SWITCH TO START AND STOP THE PUMP. IT REGULATES AND CONTROLS THE DELIVERY OF WATER.
Bur-Cam
1000481016
3/4Hp Fluomac Sw Jet Pump Tankless is rated 3.0 out of 5 by 15.
  • y_2021, m_9, d_20, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasreviews, tv_6, tr_9
  • loc_en_CA, sid_1000481016, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 66ms
  • REVIEWS, PRODUCT
Rated 2 out of 5 by from Unreliable, 2 critical failures in 5 years I installed this pump in my cabin 5 years ago. 2 years the control panel stopped working so they had to send the replacement part. Now, the pump is loosing pressure through the priming plug and I cannot remove the plug as the thread gone bad (just rotates and you cannot tighten or remove it). What's worse, I didn't even use this plug in the past 4 years as I installed a manual pump to prime this one. I contacted Burcam support but they were useless, they asked for pictures and then didn't respond to my calls or emails. Will never buy BurCam products again!
Date published: 2021-04-21
Rated 5 out of 5 by from Excellent! Complètement satisfait avec ce produit qui fonctionne à merveille.
Date published: 2019-07-09
Rated 1 out of 5 by from overheats according to Bur Cam I am on my 2nd pump in 4 years. I use them to draw water from our lake and water my lawn and gardens wash the cars etc etc. If we turn off the hose several times and re open them eventually the pump wont re start. It just makes a loud humming noise. I called the mfg and described the problem and they said they never heard of this issues. suggested it over heats but it will do this after only 5 mins of working Well i now have 2 pumps in my garage that both do the exact same thing. Yes if they run continuously they work fine but they dont seem to like being turned off and on by closing and opening your nozzle like when you wash your car etc etc. Currently i am looking for a new pump WITH a pressure tank to handle my watering requirements. 2 that dont work is enough.
Date published: 2019-05-27
Rated 2 out of 5 by from Overspend for too oversimplify Bought the pump for the stainless steel design; only the housing is stainless, many parts a cheap nylon or plastic that are not durable. Pump was installed with a 60 mil sandpoint so no sediment damages that others have reported - it's worked fine for a number of years - likely 10. Winterized by draining and filling with plumbing antifreeze - it wintered fine until this year - plastic NPT nipple on top of fluomac failed over the winter. Now I need to find out if the fluomac housing is available as a customer part - Burcam doesn't list on the website - customer service adventure begins Design wise it only does 115 v, I would prefer 230 v and cheaper electrical bills.. The fluomac is not tuneable, it comes with a factory pressure setting and it's not adjustable - this causes the pump to operate to frequently and run for too short a time I would not repurchase this pump - classic case of oversimplification of user controls results in lack of function
Date published: 2019-05-07
Rated 1 out of 5 by from waste of money I got this pump to boost my water pressure in my home i followed all the instructions but does not work i called burcam they told me what to do i did every thing i was told and still does not work the pump will not shut off this is going on for 2 mouths and now home depot will not take it back WASTE OF MONEY
Date published: 2018-04-12
Rated 2 out of 5 by from 3 year owner: Good features but poor quality We love that it can run as an On-Demand pump OR be paired with a tank and run as a traditional pump. I love the extra electronics that protect the pump more that a traditional mechanical pump. Year 1: The little bolt+washer that allows you to drain the pump unthreaded and went flying (never to be seen again). Ok maybe that was my fault, perhaps I didn't tighten it. I fashioned a replacement. Year 3: The similar bolt on the top rusted out and finally broke and went flying (found it, but it's disintegrated). Upon checking that top bolt, while it's chromed and 'appears' to be stainless steel it clearly isn't it's rusted away. Who makes a critical bolt directly exposed to the inrushing water out of metal that rusts?! This is also a VERY short bolt that just goes through some stamped steel not through a cast piece. I fashioned a replacement that'll do for the moment but I'll have to try to buy a replacement from them as it's very much a custom bolt.
Date published: 2017-08-24
Rated 5 out of 5 by from Had it ten years ! Works great still. I bought this model of Burcam in spring 2007 for our summer place where we have two RVs. We stay here 80 days each years between early May and late September. It is used to supply two RVs with water so we don't have to fill the holding tanks and listen to that annoying 12-volt pump. It pumps water from a 1,000-L tank to the trailers. Perfect for the task and has worked flawlessly.
Date published: 2016-08-08
Rated 1 out of 5 by from leaks I bought this pump 2 weeks ago and it started leaking from a bolt. I exchanged the pump for a new one today. Brought home the new pump, installed and it started immediately leaking from the control module gasket. Called Bur Cam customer service and they suggested I get it exchanged again. I was refused any kind of compensation for my troubles. Went back to Home Depot and exchanged it again. I inspected the pump with the HD rep and I noticed the guage was not put together properly (cardboard face was damaged). We had to take the gauge off the one I brought back and install on replacement.... Sent complaint into Bur Cam today waiting to hear back. HD was great to help me out.
Date published: 2016-06-21
  • y_2021, m_9, d_20, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasreviews, tv_6, tr_9
  • loc_en_CA, sid_1000481016, prod, sort_[SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 33ms
  • REVIEWS, PRODUCT

Is the maximum pressure adjustable?

Asked by: Phil
I think it's preset at 60 psi.
Answered by: Joystick
Date published: 2021-08-28

My Pump is two years old. When a tap is open and after the pump starts it takes about 3 or 4 seconds for the pressure to come up to max. This just started happening about a week ago, any suggestions?

Asked by: handyman
If you have filters specifically sediment change them. I draw water from a lake and change sediment filters every three weeks of use. 
Answered by: Schlif
Date published: 2021-08-25

Hello, My house Inlet from the city water system is 1/2 inch, outlet to the house system is 1/2 inch as well. Can I use this pump to boost the water flow rate for my house? Currently if one person use water fine, but second will have low water flow.

Asked by: Mac588
This pump is really noisy. I mean, if you have anyone leaving close to where you intend to install the pump, you should not use this one. I returned mine because of that. I ended buying another pump from another brand that solved my issue with a good noise level.
Answered by: PGoX
Date published: 2021-02-24

Hello. Renovating my home and would like to avoid upgrading the service from the city to my home bc of cost. The interior was upgraded to all showers and I installed an on demand hot water heater. Will your product help increase the pressure?

Asked by: Styles McGee
Dear Styles, yes, this pump can be install as a booster to increase the pressure. It will also help to pull water from the municipal supply. Please have a look to this link: http://www.burcam.com/en/products?view=details&mainsection_id=100&section_id=20&cat_id=220&sku=506532SS#prettyPhoto/0/ . You will see how works this product and how is the typical installation.
Answered by: Burcam expert
Date published: 2019-02-22

I want to install this unit in my food truck, the water tank is below the floor, so would be about 16” lift to pump inlet, what is the maximum pressure from this pump, I need no less than 80-100 psi.....?

Asked by: Ross
As per your explanation of your installation, this pump will provide around 60 to 65 PSI against a close discharge. Since pressure is inversely proportional to the flow, as soon as you open a tap, the pressure will drop. Unfortunately, as per your explanation, it will not reach your requirement. In reality, we need to know what flow is required at this pressure level then we can find the appropriate product.
Answered by: Burcam expert
Date published: 2021-05-24

Can you use this pump for a sand point well?

Asked by: Thua
Yes but the installation of a sand filter is mandatory, between the water source and the pump to prevent sand entering into the suction inlet of the pump body. Call our customer service desk at 1.800.361.1820 for additional information.
Answered by: Burcam expert
Date published: 2018-06-27

can i get 40 psi out of a water storage tank to supply water to 200 feet of line... ?  shower, toilets ,sinks?

Asked by: ronp
Keep in mind that the pressure is reversely proportional to the flow. If you open 3 faucets at the same time, the pressure drops tremendously. However, for one faucet, this is not a problem. Use a one inch pipe for this length of 200 feet to reduce to the minimum the friction loss.
Answered by: Burcam expert
Date published: 2021-03-07

I have a 2000 gal cistern (10 ft high) and need a pump to take out the water (not go into house) and water garden with hoses (no soaker system).Is this a pump to use? I had a sump pump in cistern-burned out-needs to be easy install no plumber. thanks

Asked by: indigo
This pump is exactly what you need for this type of application. Just hook the suction pipe in the front inlet and the garden hose, using an adaptor, at the top discharge outlet. However, connect the suction pipe at the bottom of your cistern tank to assure a gravity feed to the pump inlet. Using a suction pipe from the bottom of the cistern, running up above the cistern and dropping to the pump is not a good idea. Another installation option is to put this pump above the cistern so it can just lift the water directly from the bottom. You can call our customer service desk at 1.800.361.1820 for aditionnal information.
Answered by: Burcam expert
Date published: 2021-03-07
  • y_2021, m_9, d_20, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.19
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_CA, sid_1000481016, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 103ms
  • QUESTIONS, PRODUCT