CGC Synko UltraLight Mold Tough Drywall Compound, 3.6 L Pail

Model # 330146|Store SKU # 1000833912

Overview

Model # 330146 Store SKU # 1000833912

Cgc Synko Brand Ultralight Mold Tough Drywall Compound Is Versatile For All Drywall Joint Finishing Steps.

For drywall and plaster patching repairs

Up to 30% less weight, resists mould growth

For patching small holes and cracks in drywall and plaster surfaces. For taping and finishing joints in interior drywall.

Remix contents before use. Thin with water if needed until desired consistency is reached. Do not mix with other materials.

Store at room temperature in a dry location. Protect from freezing, extreme heat and exposure to direct sunlight. Do not use if material is discoloured or has an unpleasant odour.

Coverage Joint finishing, 3.6 L (3.8 qt. US) finishes approx. 9 m² (96ft.²) of drywall

Remix contents before use. When taping and finishing joints, thinning with water may improve application. Add clean water in 250 mL (1 cup) increments, remix and trial-apply until preferred consistency is reached. Over-dilution causes abnormal shrinkage, poor bond and other negative effects. Do not mix with any other material.

Manual

Interior Finishing Product Guide - Synko-pdf.pdf
Panels Install and Finishing Guide - English-pdf.pdf
Panels Install and Finishing Guide - French-pdf.pdf
CGC Materials Estimator - Drywall - Bilingual-pdf.pdf

The Home Depot will provide an accessible format of PDFs upon request. Please contact us at
1-800-628-0525.

Specifications

Dimensions

Assembled Depth (in inches): 12.5
Assembled Height (in inches): 12.0
Assembled Weight (in lbs): 28.9
Assembled Width (in inches): 12.5
Packaged Depth (in inches): 8
Packaged Height (in inches): 7.5
Packaged Weight (In lbs): 13.7
Packaged Width (in inches): 8

Details

Type: Lightweight

Warranty / Certifications

CGC warrants that all products are free from defects in materials and factory workmanship. Specific warranty details can vary by product. All other warranties are excluded.

Related Products

CGC Sheetrock All Purpose Drywall Compound, Ready-Mixed, 2L Pail

CGC and SYNKO Ready-Mixed Joint Compounds are high quality drying-type products which are used for taping, filling and finishing joints, trims and surfaces of gypsum board. These vinyl-based formulations are specially premixed to a creamy, smooth consistency and are ready to use right from the container. They are easy to apply and are available for hand or machine-tool applications. Protect wet joints and product from freezing. Choose CGC and SYNKO products for professional results.

View Details

CGC Synko CGC Lite Finish Drywall Filling and Topping Compound, Ready Mixed, 15.5 L Carton

Synko Lite Line Finish 17L

View Details

CGC Synko CGC Fast Set Setting Type Drywall Compound, 7.5 kg Bag

CGC and SYNKO premium setting type compounds are the professional's choice of compounds for interior gypsum panels and exterior gypsum ceiling boards. CGC's chemically setting compounds rapidly harden (approx. 90 minutes, 45 minutes, 20 minutes) and have low shrinkage allowing for same day joint finishing. These products feature exceptional bond strength (virtually unaffected by humidity) and are ideal for heavy fills (shrinkage crack resistance). In addition, CGC and SYNKO setting-type compounds can be used for filling voids in interior concrete ceilings and above-grade concrete surfaces. CGC and SYNKO premium setting type compounds should be your choice for a professional finish.

View Details

Soprema Tecsound CLG 3900 noise proofing compound

TECSOUND CLG 3900 is a single-component acrylic compound used as a soundproofing material for walls and ceilings. TECSOUND CLG 3900 acts as a decoupling material using mass-spring-mass principle by changing the vibration frequency of the assembly, reducing the transmission of airborne noise (ASTM E90) and impact noise (ASTM E492).

View Details