Columbia Forest Products 1/2in. X 2ft. X 4ft. Mahogany Plywood

Model # 1864|Store SKU # 1001513701

Overview

Model # 1864 Store SKU # 1001513701

If your minds eye envisions a woodworking creation with earth tones, turn to this PureBond Mahogany Plywood Project Panel for rich hardwood hues. Featuring plain-sliced veneers cut from natural mahogany timber, these 1/2 in. x 2 ft. x 4 ft. panels are perfect for smaller carpentry jobs or finishing off larger furniture-building projects. The core substrate is constructed with aspen and assembled in alternating cross bands for utmost strength, rigidity and flatness in each 5-ply panel. It boasts 100% natural wood (no MDF or particleboard) and is manufactured with a soy-based, formaldehyde-free PureBond adhesive that is water-resistant and will not off-gas any airborne contaminants over time, as UF-laden plywood is prone to do. Put this decorative mahogany plywood to use on your next carpentry project to create elegant hardwood-faced pieces at an affordable price.

5-ply project panel is assembled with smooth, patch-free mahogany veneers

PureBond hardwood plywood is an environmentally friendly, cost-competitive alternative to panels manufactured with urea formaldehyde (UF), which may degrade air quality over time

Contains 100% natural wood bonded with a food-grade soy-based adhesive that does not emit toxic air contaminants

Water-resistant composition has a higher moisture tolerance than UF panels and is less likely to warp than solid wood

Available in additional species - Alder, Cedar, Cherry, Hickory, Maple, Poplar, Red Oak, Walnut, and White Oak

Specifications

Dimensions

Assembled Depth (in inches): 0.5
Assembled Height (in inches): 48
Assembled Weight (in lbs): 13
Assembled Width (in inches): 24
Packaged Depth (in inches): 49
Packaged Height (in inches): 3
Packaged Weight (In lbs): 14
Packaged Width (in inches): 25

Details

Country of Origin: CA-Canada
Edge Profile: Square Edge
Fire Retardant: No
Nominal LxW (ft.): 4 x 2
Nominal Thickness (in.): 1/2
Plywood Features: Square Edge
Wood Species: Mahogany

Warranty / Certifications

Product warranted against glue or bond failure. Product replacement provided.

Related Products

Columbia Forest Products 1/4in. X 2ft. X 4ft. Prefinished Maple Plywood

Conserve time, expenses and exertion on your next cabinetry or woodworking project with the PureBond Prefinished Maple Plywood Project Panel. A UV-resistant medium gloss coats the face veneer on this 1/4 in. x 2 ft. x 2 ft. panel, protecting your carpentry creations from fading, scratching and chipping. Harvested in a sustainable manner, American-grown maple trees form the foundation for the decorative veneers, exhibiting the natural warmth and beauty of hardwood that supplies visual allure for shelves, cabinets, end tables, serving trays, wall panels, benches, letter baskets and more. The soy-based PureBond technology used to assemble each 3-ply panel is formaldehyde-free, so it will not off-gas toxic fumes as UF-constructed plywood commonly does. All-wood construction includes aspen veneer core layered in alternating cross bands for superb strength, flatness and rigidity.

View Details

Columbia Forest Products 1/4in. X 2ft. X 4ft. Mahogany Plywood

If your minds eye envisions a woodworking creation with earth tones, turn to this PureBond Mahogany Plywood Project Panel for rich hardwood hues. Featuring plain-sliced veneers cut from natural mahogany timber, these 1/4 in. x 2 ft. x 4 ft. panels are perfect for smaller carpentry jobs or finishing off larger furniture-building projects. The core substrate is constructed with aspen and assembled in alternating cross bands for utmost strength, rigidity and flatness in each 3-ply panel. It boasts 100% natural wood (no MDF or particleboard) and is manufactured with a soy-based, formaldehyde-free PureBond adhesive that is water-resistant and will not off-gas any airborne contaminants over time, as UF-laden plywood is prone to do. Put this decorative mahogany plywood to use on your next carpentry project to create elegant hardwood-faced pieces at an affordable price.

View Details

Columbia Forest Products 1/4 in. X 1 ft. X 1 ft. 7 in. Cherry Plywood (10-pack)

The decorative veneer on this 1/4 in. PureBond Cherry Plywood Project Panel is plain-sliced from a domestically harvested cherry tree, exhibiting the uniqueness and warmth of natural timber with hardwood grains running along the length of each panel for stunning visual allure. This plywood is ideal for laser etching, CNC cutting and craft work. This pack includes 10-pieces of beautiful cherry plywood, perfectly sized for most laser cutter beds.

View Details

Columbia Forest Products 1/4 in. X 1 ft. 8 in. X 4 ft. Maple Plywood (4-pack)

The natural warmth and beauty of real maple gives the decorative face veneer a splendid appearance that forms the foundation for impressive DIY creations. This plywood is ideal for laser etching, CNC cutting and craft work. This pack includes 4-pieces of beautiful maple plywood.

View Details

I am building a curved mantel for a fireplace. Does this plywood bend?

Asked by: falldogg

Yes, any half inch plywood CAN be bent, but this half-inch plywood might not be ideal for that purpose. It depends on the radius of the bend. Half-inch plywood will not bend any tighter than a two-foot arc unless we use kerf bending techniques, or lay-up multiple plies of thinner plywood ourselves. For very tight radii, we can use specialty marine plywoods or "wiggle wood" which is specifically engineered to form curves. With kerf bending, we can make standard plywood like this adopt very tight radii, sometimes as narrow as four inches! But that requires multiple cuts at a perfect depth and consistent spacing. Kerfing is neither difficult nor does it require special tools. However, it is labor intensive and DOES require accuracy, organization and patience. So, the best way to find out which method or material is best for your project is to FIRST learn about wiggle wood and other "bendable" or "flexible plywoods." Then watch a few videos on the subject of "kerf-bent plywood." As an instrument maker, I have nearly fifty years experience bending wood with heat, moisture, steam, kerfing, multiple laminations, vacuum presses and form bending. Bending any type of wood requires knowledge more than skill or fancy tools. That's why I suggest you read up or watch videos before you purchase materials. After that, you can think about the dimensions and radii of your project to decide what methods and materials will work best for you. If you are "bent" on the idea of bending wood ( pun intended ;-) then you can experiment with small sheets of this plywood. I have made Art-Deco bars using the kerfing method with plywood as thick as 3/4 inch. But to do that, I also had to build forms to hold the plywood in place, use heat to make the wood comform without cracking, and I used epoxy-resins in the kerfs for reinforcement. Having mention all those things, I should also point out, you can bend other materials ( like plastic or acrylic sheets, or very thin plywood) then veneer fancy wood around that. Since veneers are so thin, they conform to tight radii without fracture. Modern glues, especially epoxy, will bond dissimilar materials without "creep." Often, it is easier to bend solid wood than to bend standard plywood. Violin makers have been doing that for centuries with nothing more than a heat source and a stiff rod. ( hint: you will want to wear gloves!) It is also sometimes easier to bend several thin layers of solid wood and glue them together rather than bend a single thick piece. So, it all depends on the radius of the curve. If you plan a gentle curve that is a section of a ten foot circle, then YES, this can be used as-is. For any radii tighter than that, you should investigate the other methods I mentioned before investing in materials. So please think about all that and consider those options for your mantel project too. I hope I answered your question and gave you useful info! Good luck! ;-)

Answered by: HomeDepotCustomer

Date published: 2023-05-05

I am looking for dark plywood, like a Walnut or Marhogany in 3/4" - can I special order and deliver to store?

Asked by: George

Hello George, You can special order 4 ft. x 8 ft. Walnut or Mahogany at your local Home Depot store under special order SKU 226-917. Call or stop by the contractor services desk and ask for pricing on the panel. We will produce the panel and ship it to the store for you to pick up. Lead time for this item would be approximately 3 weeks. Due to the size and weight of the panel we are unable to ship by traditional ground carriers like UPS or Fed Ex. Thank You for your inquiry.

Answered by: Columbia Forest Expert

Date published: 2023-05-02

Columbia Forest Products 1/2in. X 2ft. X 4ft. Mahogany Plywood

Overview