Dock Edge 12 inch Corner Dock Wheel in Black

Model # DE95082F|Store SKU # 1001548708

Overview

Model # DE95082F Store SKU # 1001548708

Dock Edge Inflatable Dock Wheel 12" Diameter12" Smooth rolling wheel offers substantial dock cushioning and feature molded-in valves to adjust the level of firmness. Heavy-duty Hot Dipped galvanized hardware mounts securely to the dock. Guides boats into your slip easily, regardless of wind and current conditions

Molded-in valves to adjust the level of firmness

Heavy-duty, hot dipped galvanized hardware mounts securely to the dock

Inflatable dock wheel guides your boat into the slip easily

Manual

The Home Depot will provide an accessible format of PDFs upon request. Please contact us at
1-800-628-0525.

Specifications

Duty Rating

Heavy

Connector Type

Corner Kit

Material

Polyethylene

Dock Hardware Type

Wheels

Product Size

12 in.

Dimensions

Assembled Depth (in inches): 15.0
Assembled Height (in inches): 9.0
Assembled Weight (in lbs): 9.0
Assembled Width (in inches): 12.0
Packaged Depth (in inches): 15
Packaged Height (in inches): 8
Packaged Weight (In lbs): 9
Packaged Width (in inches): 12

Details

Bracket Shape: Corner
Connector Type: Corner Kit
Dock Hardware Type: Wheels
Duty Rating: Heavy
Material: Polyethylene
Product Size: 12 in.

Warranty / Certifications

Related Products

Howell Floating Dock Outside Corner End

Floating Dock Hardware component manufactured from 5 Gauge (1/4") hot dip galvanized steel. Slot size is 9/16" x 1-5/8". Use Outside Corner End to strengthen outside corners. Outside Corner use with backer plates or inside corner at outside end of docks, fingers or swim platform.

View Details

Dock Edge Dock Cleat, 12 inch, Galvanized

These are your traditional, cast iron, hot dip galvanized Dock Cleats. The mounting holes are recessed with a hexagonal shape to stop the head of a carriage bolt from turning. This eliminates the need to use tow wrenches when mounting.

View Details

Dock Edge Rolling Dock Wheel, 24in Foamed

Wheels are available in 18 or 24 diameters and up to 1500 lb. capacity per wheel. These tough, rigid wheels offer stress, crack and impact resistance. They roll easily over virtually any terrain and will not rust on the axle. Use for roll-in docks or boat lifts. All wheels accept a 1-7/8 O.D. Axle. See chart below for wheel capacity.

View Details

Dock Edge Mooring Snubber, 1/2 inch-3/4 inch, 14-18mm

For secure and cushioned mooring. Ideal for both motor and sailing boats. The forces the line is exposed to, are taken up by the elongation of the mooring snubber, reducing the shock load on the line as well as the boat's hardware.

View Details