Dremel 8200-1/28 Cordless 12V Max

PLA is especially ideal for printing objects with flat surfaces, hard angles and ones requiring tight tolerances for fit. Manufacturing Process: Controlled using Non-Contact Laser Diameter Gauge:10.03 mm Tolerance. Monitored with rapid, reproducible and repeatable measurements to exact dimensional tolerances. Maintaining high consistency of dimensional accuracy Certifications: D3D Filaments are complaint with ROH Certifications: free from any potential hazardous substances including cadmium, mercury and chromium. Technical Specification Printing Temperature : 1900C - 2300C Heated Bed: PLA can be printed with or without a heated print bed, however, if your 3D printer does have a heated bed, it is recommended that you set your bed temperature to approximately 600C. First layer usually 50C-100C higher than subsequent layers. With Glow in the Dark PLA, increasing your print temperature 5 to 100c is recommended. Sticks well to Glass with PVA Glue ,BuildTak, PEI, or blue tape.

PLA is especially ideal for printing objects with flat surfaces, hard angles and ones requiring tight tolerances for fit. Manufacturing Process: Controlled using Non-Contact Laser Diameter Gauge:10.03 mm Tolerance. Monitored with rapid, reproducible and repeatable measurements to exact dimensional tolerances. Maintaining high consistency of dimensional accuracy Certifications: D3D Filaments are complaint with ROH Certifications: free from any potential hazardous substances including cadmium, mercury and chromium. Technical Specification Printing Temperature : 1900C - 2300C Heated Bed: PLA can be printed with or without a heated print bed, however, if your 3D printer does have a heated bed, it is recommended that you set your bed temperature to approximately 600C. First layer usually 50C-100C higher than subsequent layers. With Glow in the Dark PLA, increasing your print temperature 5 to 100c is recommended. Sticks well to Glass with PVA Glue ,BuildTak, PEI, or blue tape.