Appliances Bath Blinds & Window Coverings Building Materials Cleaning Decking, Lumber & Composites Décor & Furniture Doors & Windows Electrical Floors & Area Rugs Hardware Heating & Cooling Kitchen Lawn & Garden Centre Lighting & Ceiling Fans Outdoor Cooking & BBQs Outdoor Living & Patio Paint Plumbing Smart Home Storage & Organization Tools All Departments Father's Day Gift Centre Patio Savings Event
3-Hour Delivery Starting at $12.97*  Learn More

Dricore Pro Concrete Repair Carbon Fiber Reinforcement Kit

Model # FG20121|Store SKU # 1001628198

Dricore Pro Concrete Repair Carbon Fiber Reinforcement Kit

Overview

Model # FG20121 Store SKU # 1001628198

The DRICORE PRO Concrete Repair system has been specifically designed and engineered to seal, fill and structurally reinforce concrete cracks. This 3-step system includes: Step 1 CRACK PREP SURFACE PASTE, Step 2 CRACK INJECTION EXPANDING FOAM and Step 3 the CARBON FIBER REINFORCEMENT KIT.

  1. Each kit will fix approximately one wall crack that measures 7.5 feet long (228 cm long)
  1. Step 3 of a 3-step approach to concrete repair
  1. Lightweight, 10x stronger than steel and non-corrosive
  1. Increases structural strength
  1. Carbon fiber is easily painted over for a discrete repair
  1. Use the included epoxy with a standard caulking gun (sold separately)

Manual

  1. DRICORE_carbon_fiber_reinforcement_kit_instructions_English.pdf
  2. DRICORE_carbon_fiber_reinforcement_kit_instructions_FR_LR.pdf

The Home Depot will provide an accessible format of PDFs upon request. Please contact us at
1-800-628-0525.

Specifications

Dimensions

Assembled Depth (in inches)
4
Assembled Height (in inches)
11.62
Assembled Weight (in lbs)
1.5
Assembled Width (in inches)
4
Packaged Depth (in inches)
4
Packaged Height (in inches)
11.62
Packaged Weight (In lbs)
1.5
Packaged Width (in inches)
4

Details

Base Material
Carbon
Colour Family
Black, Grey
Country of Origin
CA-Canada
Drying Time (hrs)
4
Features
Crack Resistant
Recommended Application
Wall, Concrete
Type
Patch/Repair
Use Location
Floor, Wall

Warranty / Certifications

2 years on the adhesive, 25 years on the carbon fiber. Warranty does not cover installation.
Related Searches
aquaphalt patch
20 inch x 23 ft sheet
resisto multipurpose waterproofing membrane
sakrete fast patch 15 kg
sakrete topn bond 2 kg
sika anchorfix 1
sika latex
zinsser sealant

Related Products

RESISTO Basic Waterproofing Membrane 20 inch X 23 ft. Base Sheet - Two-Ply System

The BASIC WATERPROOFING MEMBRANE is a self-adhesive membrane made of elastomeric bitumen and a trilaminate woven polyethylene facer. It is the ideal waterproofing solution for roofs as a base sheet in two-ply roofing systems. It can also be used for decks, balconies, patios, foundations and foundation cracks, shower bases and wash-up rooms.

The BASIC WATERPROOFING MEMBRANE is a self-adhesive membrane made of elastomeric bitumen and a trilaminate woven polyethylene facer. It is the ideal waterproofing solution for roofs as a base sheet in two-ply roofing systems. It can also be used for decks, balconies, patios, foundations and foundation cracks, shower bases and wash-up rooms.
View Details

Bakor Aqua-Bloc 770-06

Excellent for use on concrete, masonry foundation walls, parking decks, planters and reflective pools. Use with Yellow Jacket reinforcing fabric to treat cracks and joints. Heavy bodied trowel grade coating to provide seamless rubberized asphalt membrane.

Excellent for use on concrete, masonry foundation walls, parking decks, planters and reflective pools. Use with Yellow Jacket reinforcing fabric to treat cracks and joints. Heavy bodied trowel grade coating to provide seamless rubberized asphalt membrane.
View Details

Marshalltown Concrete Kit

The Marshalltown Finisher's Totes are made of double layer durable water resistant nylon with a rigid reinforced base and stiffened side panels. The are open ended with bracket windows to fit any length pole, bull float or fresno.

The Marshalltown Finisher's Totes are made of double layer durable water resistant nylon with a rigid reinforced base and stiffened side panels. The are open ended with bracket windows to fit any length pole, bull float or fresno.
View Details

Aquaphalt 6.0 (Medium), 23 Kg, Permanant & Environmentally Friendly Asphalt or Concrete Repair

Aquaphalt is a revolutionary, high performance, flexible, reactive, cold-mix, asphalt repair product for use in repairing asphalt and concrete road surfaces. Aquaphalt reacts with plain water to provide a permanent repair solution. All sizes of Aquaphalt are free of solvents or volatile organic compounds (VOCs). This product is offered in a 23 KG pail.

Aquaphalt is a revolutionary, high performance, flexible, reactive, cold-mix, asphalt repair product for use in repairing asphalt and concrete road surfaces. Aquaphalt reacts with plain water to provide a permanent repair solution. All sizes of Aquaphalt are free of solvents or volatile organic compounds (VOCs). This product is offered in a 23 KG pail.
View Details
Concrete Repair Carbon Fiber Reinforcement KitDricore Pro Concrete Repair Carbon Fiber Reinforcement KitThe DRICORE PRO Concrete Repair system has been specifically designed and engineered to seal, fill and structurally reinforce concrete cracks. This 3-step system includes: Step 1 CRACK PREP SURFACE PASTE, Step 2 CRACK INJECTION EXPANDING FOAM and Step 3 the CARBON FIBER REINFORCEMENT KIT.
Dricore Pro
1001628198
CAD1192023-06-10
The Home Depot Canada
Concrete Repair Carbon Fiber Reinforcement Kit is rated 4.0 out of 5 by 25.
  • y_2023, m_6, d_8, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.35
  • cp_1, bvpage1
  • co_hasreviews, tv_2, tr_23
  • loc_en_CA, sid_1001628198, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getAggregateRating, 148ms
  • REVIEWS, PRODUCT
Rated 5 out of 5 by from Very good quality concrete repair I’ve only used this product recently so I honestly don’t know what the long term effects will be but it’s a great product to work with. Instructions are well laid out too. The version I used was a two step product with a cloth fibre that when pasted over works a lot like how you would mud over mesh/paper upon drywall. The only factor here is you cannot sand once dried so smooth out the compound as evenly as possible before it dries. I’ve used a similar product in the past which uses mini rebar’s and an epoxy cement mix, the problem with that one was having to grind out pockets for the rebar. So this product I’m favouring for now.
Date published: 2022-03-21
Rated 4 out of 5 by from Good product, follow instructions! I work in the adhesives industry and the product works very well, but I would encourage you to follow the instructions and ensure that you do a good job on the surface prep! I had some wide sections in my crack and used glass fiber tape to help support the epoxy to seal it. Wait a day between each step to ensure a good cure. The urethane foams and will expand, pump slow and steady and be patient. If you're worried about running out of epoxy on stage four, apply less for the first coat and then use a tool to push the epoxy into the carbon fiber weave. Wear gloves! don't wear good clothes, step 3 can be a bit messy.
Date published: 2021-08-31
Rated 3 out of 5 by from Concrete Repair i got this product to repair a hole in the garage floor. its awesome once you get it out of the tubes. Found it was very challenging to convince the adhesive/fill to come out. Might have been because i had it shipped and it was outside for a few hours after delivery before i could bring it inside. even when i left it to sit for 3 days thinking it would soften up still nothing. would recommend you pick this product up to prevent freezing if its a winter repair. otherwise great product.
Date published: 2022-03-09
Rated 5 out of 5 by from High end kit! This is a great little kit. It includes everything you need clean up and repair cracks up 7.5’ long. It’s not cheap but the results you can get are top notch. As with any repair system involving adhesives and foam, make sure to fully clean the area and follow all instructions before you ‘pull the trigger’; a little extra prep time to make sure you’re doing it right can save hours in unnecessary cleanup and repairs. Overall, recommend, I just hope you don’t have too many cracks!
Date published: 2022-03-10
Rated 4 out of 5 by from Good Product-Read the Description When I first saw this product, I didn’t realize it was step 3 in a 3-step product. Each step is sold separately and is NOT included with this product. Step 1 is a surface prep product which sets up the wall for injecting polyurethane foam through injection ports. The step 2 product is the polyurethane foam which will fill the void in the wall. And finally, this product—step 3, this reinforces the crack repair to stabilize it. It will not stabilize your wall if you have major structural issues. Not all concrete walls are smooth, so Surface preparation is key for a good result—you will require a grinder with a diamond cup wheel to prep the crack area (wear safety goggles & dust mask). I would strongly recommend wearing gloves when working with this product, not only is it messy and hard to get off your skin, but it’s an irritant too. I was working in a crawl space, so I added a fan & wore my respirator when working with this product. It did come with a full safety data sheet, instead of microscopic print on the side of the container which is impossible to read--nice job Dricore!. It’s paintable when cured, my repair was in a crawl space & will never be seen, so I didn’t bother. Overall, I’m happy with the product—follow the instructions & you should have no problems.
Date published: 2022-02-27
Rated 3 out of 5 by from Concrete repair carbon fibre reinforcement I received this product for review and was finally able today to apply it. Tha application was simple and went according to the instructions. The prep work is messy since it involves grinding concrete but necessary. Keep the shop vac handy. I’m hopeful that it will stop the water infiltration but will have to wait and see. The prep and application were today. Tomorrow we’ll see if the patch is cured and blocking the leak.
Date published: 2022-04-09
Rated 4 out of 5 by from Good value I received this as part of a promotion. I haven’t had a chance to use this product yet, but the idea behind it is great and seems like it will work great. It is a very generous amount on the roll of material they give. I’m not sure how far the epoxy will go in comparison to the supplied matting. Overall I think this product is a good value and think it will work well. I look forward to using it in the future and would recommend to anyone trying to do a self repair on cracked concrete. Hope this review helps someone
Date published: 2022-03-02
Rated 1 out of 5 by from Works extremely well. I used Dricore Concrete Repair to fix or repair several big cracks on my concrete slab in my garage, I followed the application instructions and it really bonds the concrete together, only due to the different color you can tell it has been repaired but it looks flush and easy to work with, not a big mess for cleaning and it worked as what is intended to do. Great product.
Date published: 2022-04-05
  • y_2023, m_6, d_8, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.35
  • cp_1, bvpage1
  • co_hasreviews, tv_2, tr_23
  • loc_en_CA, sid_1001628198, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getReviews, 49ms
  • REVIEWS, PRODUCT

Can this be applied to the exterior side of a wall?

Asked by: John
It might work but it's meant for the inside. You need to cut drywall etc to expose the foundation on the interior to do this properly for a lasting repair.
Answered by: Renovader55
Date published: 2023-05-28

Can this be used on block foundation

Asked by: Ron68
Yes. Here is a great link to show how. The key is; prep the walls properly. Follow the spacing guidelines. Follow the application process. https://www.rhinocarbonfiber.com/bowed-wall-repair-kits
Answered by: DIY guy
Date published: 2023-04-05

Is this a polyurethane crack filling system or a 2-part epoxy carbon fiber crack reinforcement system? The description and the reviews are a bit confusing.

Asked by: Nitrous2023
It is a 2 part epoxy carbon fiber crack reinforcement system. It can be used in conjunction with their polyurethane crack injection system 
Answered by: Pbuzz
Date published: 2023-05-07

did people who had problems "getting the product out" of the tubes warm the two part system first?

Asked by: Nitrous2023
Hello Nitrous, From our experience, those that experienced issues were not aware of the conditioning recommendation.
Answered by: DRIcore Products
Date published: 2023-05-01

Can this be used in the winter when the foundation is cold? thx G

Asked by: sagelike
Please find temperature information below. Expanding Polyurethane: CURING TIME Polyurethane Injection Expanding Foam has a working time of 3 minutes at 77°F (25°C). At temperatures below 77°F (25°C) this product will take proportionately longer time to begin expanding. At temperatures above 77°F (25°C) it will take a proportionately shorter time to begin expanding. Thin layers (5 mil) will become tack-free in approximately 45 minutes 77°F (25°C). APPLICATION TEMPERATURE 40°F (5°C) to 110°F (43°C). If ambient temperature is below 70°F (21°C), condition the cartridge to 70-75°F (21-24°C) for at least 1 hour before using it. CONDITION PRODUCT When the work environment or substrate falls below 70˚F (21˚C) condition the product to 70-75˚F (21˚C - 24˚C) prior to use. Temperature will affect the workability and cure time of epoxy.
Answered by: DRIcore Products
Date published: 2021-12-10
  • y_2023, m_6, d_10, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.35
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_CA, sid_1001628198, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot-canada
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • CLOUD, getContent, 124ms
  • QUESTIONS, PRODUCT