Everbilt 4 7/8-inch Zinc Door Pull

The SK703 keyed deadbolt for storm and screen doors complements the appearance of the DX Series pull and push-button handles while adding additional security to your home.FUNCTIONALITYA keyed deadbolt allows you keep your main door open and enjoy the light that comes in through a storm door while still feeling secure. The SK703 is not a high security lock, but a secondary level of security. The key allows you to lock your storm door as you leave the home, and unlock it if someone inside has locked the door. INSTALLATION Installation is easy and should take about 20 minutes. Only three small 5/16" holes are required to be drilled through the door for the screws and spindle (many of our competitors' locks require larger 7/8" holes). Only a tape measure, drill and screw driver are required. A center punch to mark the holes is handy, but not required. The set includes screws for doors 1” to 2-1/8” thick. The spindle can be cut to the length required. The SK703 is designed for out-swinging storm doors. You may be able to use it on an in-swinging storm door, but we can't provide instructions for doing so and you may need to get creative. MORE If you have a lever-style handle set, you may want to consider our GL Series deadbolt (model # SKGLK). The set is manufactured from die cast zinc and painted or coated to match the colour of the handles. Ideal Security has been supplying quality storm and screen door hardware to door manufacturers for over 50 years.

Upgrade the basic push button handle that may already be on your screen door with this elegant and easy to operate handle.This storm door hardware set includes an elegant lever handle and an integrated keyed deadbolt. It compliments a wide range of dicor styles, and is compatible with most pre-installed surface-mount handles.FEATURES The interior latch features an easy opening push movement. The integrated keyed lock provides additional security, so you can keep your main door open and enjoy the light and fresh air while still feeling safe.This set includes everything needed for an easy installation. The package includes screws and spindles to fit doors from 1 in. to 2-1/8 in. thick (spindles can be cut to suit the width of your door).NEW INSTALLATIONS New installations should take about 45-60 minutes. You'll need to drill a new 7/8 in. hole for the key lock. Before drilling, ensure that the inside latch and lock do not interfere with the operation of your main door handle.Tools required:-Tape measure-Drill-7/8 inch spade bore drill bit-Screw driver-A center punch to mark the holes is helpful.REPLACEMENTS When replacing an existing handle, please verify carefully the dimensions and configuration of your existing handle set. There are lookalike sets on the market that look the same from the front but are significantly different and will not be compatible.This handle set uses the 2 posts with 1-3/4 in. spacing which is standard to most storm door handles. Other brands use up to 4 posts. Each post requires a hole to be drilled through your door. This handle has 3 in. between the handle and the key lock. Other brands are different. The interior lock in this set is fastened directly to the inside face of the door, and does not connect to the outside handle.

The DX storm door PULL handle and keyed locking set compliments a wide range of decor styles. This elegant and easy to operate handle can replace a push button handle that may be on your screen door. The screw posts must be 1-3/4 in. apart. The interior latch features an easy opening push movement which does not lock. The included keyed lock complements the appearance of the handle and provides additional security. Keep your main door open and enjoy the light that comes in through a storm door, and still feel secure. This is not a high security lock, but a secondary level of security. The key lock is usually installed above the handle. Three additional holes are required to be drilled through the door for the screws and spindle for a new installation. This set includes everything needed for an installation and will fit doors from 1 in. to 2-1/8 in. thick.

Upgrade the basic push button handle that may already be on your screen door with this elegant and easy to operate handle.This storm door hardware set includes an elegant lever handle and an integrated keyed deadbolt. It compliments a wide range of dicor styles, and is compatible with most pre-installed surface-mount handles.FEATURES The interior latch features an easy opening push movement.The integrated keyed lock provides additional security, so you can keep your main door open and enjoy the light and fresh air while still feeling safe.This set includes everything needed for an easy installation. The package includes screws and spindles to fit doors from 1 in. to 2-1/8 in. thick (spindles can be cut to suit the width of your door).NEW INSTALLATIONS New installations should take about 45-60 minutes. You'll need to drill a new 7/8 in. hole for the key lock. Before drilling, ensure that the inside latch and lock do not interfere with the operation of your main door handle.Tools required:-Tape measure-Drill-7/8 inch spade bore drill bit-Screw driver-A center punch to mark the holes is helpful.REPLACEMENTS When replacing an existing handle, please verify carefully the dimensions and configuration of your existing handle set. There are lookalike sets on the market that look the same from the front but are significantly different and will not be compatible.This handle set uses the 2 posts with 1-3/4 in. spacing which is standard to most storm door handles. Other brands use up to 4 posts. Each post requires a hole to be drilled through your door.This handle has 3 in. between the handle and the key lock. Other brands are different.The interior lock in this set is fastened directly to the inside face of the door, and does not connect to the outside handle.